Bedienungsanleitung Panasonic AJ-HDX900 (Seite 56 von 134) (Englisch)

99987

Zoom out

Zoom in

Vorherige Seite

1/134

Nächste Seite

< VF MARKER >

MKR:A

TABLE :A

CENTER MARK :1

SAFETY ZONE :2

SAFETY AREA :90%

FRAME SIG :4:3

FRAME MARK :OFF

FLAME LVL :15

< CAMERA ID >

ID1 : ABCDEFGHIJ

ID2 : ABCDEFGHIJ

ID3 : ABCDEFGHIJ

4-7-6 Setting the camera ID

The camera ID is set on the CAMERA ID screen.

Up to ten alphanumerics, symbols and spaces can be used.

<Note>

The camera ID is not displayed while the setting menu is

displayed even if color bar signals are output.

4-7-5 Setting the marker displays

ON, OFF or the display type can be selected for the displays

of the center marker, safety zone markers, safety zone area

and frame marker. To make the selection, perform menu

operations to open the <VF MARKER> screen from the VF

page and select the display mode for each item.

For details on operation, refer to “4-6-2 Basic menu

operations.”

Perform a menu operation to open the <CAMERA ID>

screen from the OPERATION page.

Turn the JOG dial button to move the arrow (cursor) to

the “ID 1: to 3:” item.

µ: Message is to be displayed.

≤: Message is not to be displayed.

Setting change/adjustment result messages and display modes

Situation in which message is displayed Message

Display mode

setting

123

≤≤µ

When the filter selection has been changed CC: n (n=1, 2, 3, 4) or ND: m (m=A, B, C, D)

≤≤µ

When the gain setting has been changed GAIN: n dB

(n= –3, 0, 3, 6, 9, 12, 15, 18, 21, 24, 27, 30)

≤≤µ

When the WHITE BAL switch setting has been changed

WHITE: n (n=ACH, BCH, PRESET)

≤µµ

When the OUTPUT/AUTO KNEE switch has been set

to AUTO KNEE or OFF

AUTO KNEE: ON (or OFF)

≤µµ

When the shutter speed/mode setting has been changed

SS: 1/60 (or 1/120, 1/250, 1/500, 1/1000, 1/2000, 1 1/¢¢¢¢)

≤µµ

When the white balance (AWB) has been adjusted Example) AWB A OK 3.2K

≤µµ

When the black balance (ABB) has been adjusted Example) ABB OK

≤≤µ

When the extender has been selected Example) EXTENDER ON

≤µµ

When a user button has been selected Example) UM: S.GAIN 30 dB

≤≤µ

When a marker select button has been selected Example) MKR: A

≤µµ

When in iris overwrite status Example) ++ F 5.6

4-7-4 Display modes and setting

changes/adjustment result messages

By setting the display mode item, it is possible to select

various display methods for the changes made in the

settings and for the messages advising the user of the

adjustment results: for instance, the items displayed can be

limited to a select number or not displayed at all. To select

the display mode, perform menu operations to open the <VF

DISPLAY> screen from the VF page and select the setting

for the DISP MODE item.

For details on operation, refer to “4-6-2 Basic menu

operations.”

<Note>

The MKR: A indication at the upper right of the screen shows

the display status. To check the settings for TABLE B, press

the MARKER SELECT so that MKR:B is displayed.

< VF DISPLAY >

DISP CONDITION :NORMAL

DISP MODE :3

VF OUT :Y

VF DTL :3

ZEBRA1 DETECT :070%

ZEBRA2 DETECT :085%

ZEBRA2 :SPOT

LOW LIGHT LVL :35%

RC MENU DISP. :ON

MARKER/CHAR LVL :50%

Chapter 4 Adjustments and settings for recording

(continued)

01.AJ-HDX900_P_E(VQT0X86)_E 06.6.22 12:52 PM ページ56

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HDX900 Seite 56

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info