Bedienungsanleitung Panasonic AJ-HPX 3000G (Seite 185 von 198) (Englisch)

597945

185

Zoom out

Zoom in

Vorherige Seite

1/198

Nächste Seite

185

Menu : Menu Description Tables

The ____ in the Adjustable Range column indicates the

preset mode.

MIC/AUDIO2

Items/

Data Saved

Adjustable

Range

Remarks

FRONT MIC

POWER

OFF

Select the phantom power supply for the

front microphone.

–CUF–

REAR MIC

POWER

OFF

Select the phantom power supply for the

rear microphone.

When OFF is selected, no phantom

power is supplied even if the REAR

AUDIO CH1 or CH2 switch is set to +48.

–CUF–

MONITOR

SELECT

STEREO

MIX

When the MONITOR switch is set to ST

(stereo), select the signal format for the

monitor output.

–CUF–

FRONT MIC

LEVEL

–40dB

–50dB

Select the front microphone input level.

–CUF–

REAR MIC

CH1 LVL

–50dB

–60dB

Select the rear microphone input level.

–CUF–

REAR MIC

CH2 LVL

–50dB

–60dB

Select the rear microphone input level.

–CUF–

REAR LINE IN

LVL

+4dB

0dB

–3dB

Select the rear line input level.

–CUF–

AUDIO OUT

LVL

+4dB

0dB

–3dB

Select the audio output level.

–CUF–

HEADROOM 18dB

20dB

Set the headroom (standard level).

–CUF–

WIRELESS

WARN

OFF

Select whether or not to enable the

alarm to trigger for poor wireless

receiver reception.

–CUF–

TC/UB

Items/

Data Saved

Adjustable

Range

Remarks

TC MODE

NDF

Set the time code mode.

DF: Drop frame.

NDF:Non drop frame.

Note

When the camera-recorder operates at

50 Hz or in 24P or 24PA mode, the non-

drop frame is always used.

–CUF–

UB MODE

USER

TIME

DATE

EXT

TCG

FRM RATE

REGEN

Select the user bits mode.

USER: Select UB value set in the LCD

section.

TIME: Select local time (hours,

minutes, seconds).

DATE: Select local date and time (2 last

digits of year, month, date, time).

EXT: When "CAM" , "VIDEO", or

"SDI" is selected in REC

SIGNAL on the SYSTEM MODE

screen, the user bits input to the

TC IN connector are recorded.

When "1394" is selected, the

user bits of signals input to the

DVCPRO connector are

recorded.

If reading fails, USER value is

retained.

TCG: TCG value enters UB.

FRM RATE:

Select the shooting information (e.g.

frame rate) for the camera. For more

information, see [Frame rate

information recorded in user bits]

(page 58).

When clips recorded in Native mode

are played back, the frame rate

information recorded in users bits in

the VAUX range is output.

REGEN

: Read out value stored in the

card and record value

continuously.

–CUF–

VITC UB

MODE

USER/EXT

TIME

DATE

TCG

FRM RATE

REGEN

Select the user bits mode for VAUX TC

(VITC).

USER/EXT:

If UB MODE is set to EXT, the EXT

value is recorded. If not, USER value

set by UB is recorded.

TIME: Select local time (hours,

minutes, seconds).

DATE: Select local date and time (2 last

digits of year, month, date, time).

TCG: TCG value enters UB.

FRM RATE:

Select camera shoting information

(frame rate, etc.). For more

information, see [Frame rate

information recorded in user bits]

(page 58).

REGEN

: Read out value stored in card

and record value continuously.

Note

When the camera-recorder operates in

24P, 24PA, 30P (AVC-I) or 25P (AVC-I)

mode, FRM RATE is always selected.

–CUF–

AJ-HPX3000G(VQT1D27)E.book 185 ページ２００７年９月３日　月曜日　午後２時３４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-HPX 3000G Seite 185

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info