Bedienungsanleitung Panasonic AJ-SPC 700P (Seite 30 von 124) (Englisch)

597959

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Chapter 4 Adjustments and Settings for Recording

To record high-quality video with the AJ-SPC700P, the black

and white balances must be adjusted according to

conditions.

For higher quality, it is recommended that the adjustments

should be made in this order AWB (white balance

adjustment)  ABB (black balance adjustment)  AWB

(white balance adjustment).

4-1 Adjusting the White balance

and Black Balance

4-1-1 Adjusting the White Balance

Whenever light conditions change, the white balance must

be re-adjusted.

To adjust the white balance, follow the steps below.

1 Set the switches as illustrated below.

2 Adjust the CC/ND FILTER control according to the light

conditions.

<Note>

For examples of CC/ND FILTER adjustments, see [2-4

Shooting and Recording/Playback Functions Section].

3 Place a white pattern at a point where the light

conditions match those for the light source of the

subject. Then zoom-in on the white pattern so that

white color appears in the screen. A white object (cloth

or wall) may be used instead of a white pattern.

The illustration below shows the required size for the

white space.

<Notes>

z Do not include a high-intensity spot in the screen.

z The white object must appear at the center of the

screen.

4 Adjust the lens iris.

5 Flip up the AUTO W/B BAL switch so that it is

positioned at [AWB], then release it.

The switch returns to the central position with the white

balance automatically adjusted.

<Note>

To cancel automatic white balance adjustment in

process (the viewfinder displays “AWB ACTIVE”), re-

position the AUTO W/B BAL switch at [AWB].

If automatic adjustment is cancelled, the value in effect

before automatic adjustment will be used.

6 During an adjustment, the viewfinder displays the

following message:

7 The adjustment will take effect in a few seconds, and

the following message will appear:

The adjusted value is automatically stored in the

memory specified in Step

1 ([A] or [B]).

8 For the 3200K CC/ND filter, if the subject’s color

temperature is lower than 2300K or higher than 9900K

the following message appears:

If the arrow points down () the actual color

temperature is lower than the temperature indicated. If

the arrow points up () the actual temperature is

higher than the temperature indicated.

OUTPUT: CAM

CC/ND FILTER control

AUTO W/B BAL

switch:

Used to perform AWB.

GAIN:Under normal conditions, set to 0 dB

If it is too dark, an appropriate gain

should be set.

WHITE BAL: A or B

1/4 or more of the screen in width

1/4 or more of the

screen in height

ޓޓޓޓޓޓޓޓޓޓޓޓޓޓ

$:%$&7,9(

ޓޓޓޓޓޓޓޓޓޓޓޓޓޓ

$:%$2..

ޓޓޓޓޓޓޓޓޓޓޓޓޓޓ

$:%$2..



#,52%2'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-SPC 700P Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info