Bedienungsanleitung Panasonic AJ-SPC 700P (Seite 38 von 124) (Englisch)

597959

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Chapter 4 Adjustments and Settings for Recording (continued)

4-5-2 Setting the Internal Clock’s Date

and Time

1 Position the DISPLAY switch at [UB].

2 Press the HOLD button to display a date in the display

window.

3 Position the TCG switch at [SET].

4 Use the CURSOR and SET buttons to set the year,

month and day (Y/M/D).

Note that any later than 2030 cannot be set.

5 Press the HOLD button to display a time in the display

window.

6 Use the CURSOR buttons to set the hour, minute and

second (h/min/s).

7 Position the TCG switch at [F-RUN] or [R-RUN]. The

internal clock starts at the moment the switch position is

changed.

8 Press the HOLD button to display a time zone (time

difference between local time and Greenwich Mean

Time) in the display window.

9 Position the TCG switch at [SET].

10 Use the  and  buttons to set the desired hours and

minutes ahead of (no sign) or behind (– sign) the

Greenwich Mean Time).

Example: If the local time is five hours behind

Greenwich Mean Time,

set the time zone to “5:00 –”.

The time zone is always recorded, together with the

date and time, as metadata.

See the table at right to set the time zone according to

your local time.

11 Position the TCG switch at [F-RUN] or [R-RUN] to

accept the time zone.

<Notes>

z When using the camera-recorder for the first time, be

sure to perform this setting beforehand. Do not

change the setting during use of the camera-

recorder.

z When the TCG switch is positioned at [SET],

thumbnails cannot be manipulated.

<Notes>

z In Step 4, if the TCG switch is positioned at [F-RUN] or [R-

RUN], this also activate the internal clock.

To cancel date, time and time zone settings in process,

hold down the SET button and position the TCG switch at

[F-RUN] or [R-RUN].

z Clock accuracy fluctuates between about

± 30 seconds

per month when the power is turned off. If more accurate

timekeeping is required, check the time when the power is

turned on and, if necessary, reset the clock.

Time

difference

Area

Time

difference

Area

00:00 Greenwich – 00:30

– 01:00 Azores Islands – 01:30

– 02:00 Mid-Atlantic – 02:30

– 03:00 Buenos Aires – 03:30

Newfoundland Island

– 04:00 Halifax – 04:30

– 05:00 New York – 05:30

– 06:00 Chicago – 06:30

– 07:00 Denver – 07:30

– 08:00 Los Angeles – 08:30

– 09:00 Alaska – 09:30 Marquesas Islands

– 10:00 Hawaii – 10:30

– 11:00 Midway Island – 11:30

– 12:00 Kwajalein + 11:30 Norfolk Island

+ 13:00 + 10:30 Lord Howe Island

+ 12:00 New Zealand + 09:30 Darwin

+ 11:00 Solomon Islands + 08:30

+ 10:00 Guam + 07:30

+ 09:00 Tokyo + 06:30 Rangoon

+ 08:00 Beijing + 05:30 Bombay

+ 07:00 Bangkok + 04:30 Kabul

+ 06:00 Dacca + 03:30 Tehran

+ 05:00 Islamabad + 02:30

+ 04:00 Abu Dhabi + 01:30

+ 03:00 Moscow + 00:30

+ 02:00 Eastern Europe + 12:45 Chatham Islands

+ 01:00 Central Europe

#,52%2'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-SPC 700P Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info