Bedienungsanleitung Panasonic AJ-SPX 800P (Seite 15 von 116) (Englisch)

597960

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

OUTPUT SEL (output signal selection) switch

Used to switch the signals output from the VIDEO OUT and

MON OUT connectors.

MEM: In EE (recording) mode, video from the camera is

output. In VV (playback) mode, playback signal

from a P2 card is output.

CAM: Video from the camera is output constantly.

OFF: Video is not output, and the video camera-

recorder operates in power-saving mode.

Note that the audio output is synchronised with the video.

For types of video outputs, see [4-9-2 Selecting Video

Output Signals].

REW (rewind) button and lamp

During pause, this button performs a fast-reverse playback

with the lamp blinking.

During playback, it performs an approximately 4C fast-

reverse playback with the PLAY and REW lamps blinking.

If this button is pressed when playback is paused, the start

of the clip being played back is located in pause mode.

FF (fast forward) button and lamp

During pause, this button is used to perform fast playback

with the lamp blinking.

During playback, it performs an approximately 4C fast

playback with the PLAY and FF lamps blinking.

If this button is pressed when playback is paused, the start

of the next clip is located in pause mode.

STOP button

This button stops playback.

PLAY/PAUSE button

This button is used to view playback using the viewfinder

screen or a color video monitor. The lamp comes on when

playback starts.

In playback mode, this button pauses (PLAY PAUSE)

playback with the lamp blinking.

REC button

Pressing this button starts recording, and pressing again

stops recording.

This button has the same function as the REC START/

STOP button and the VTR button at the lens.

It may be disabled with the recording protection button.

REC protection button

This button disables the REC button on the handle.

ON: The REC button is enabled.

OFF: The REC button is disabled.

P2 CARD STATUS LED

This LED indicates the recording and playback status of

each card.

Slide lock button

Used to open the slide-out door for inserting P2 cards. While

depressing this button, slide the door to the left.

USB 2.0 connector

A USB 2.0 cable is connected here. (To be supported in the

near future.)

GENLOCK IN connector

This connector is used to input a reference signal when the

camera unit is gen-locked, or when the time code is

externally locked. If VIDEO is selected for the menu option

REC SIGNAL, the connector can be used to record actual

signals. The menu option REC SIGNAL is found on the

SYSTEM MODE screen on the SYSTEM SETTINGS page.

<Notes>

z The reference input signal must be a standard VBS

(Video Burst Sync).

z If you need to synchronise the input signal with the AJ-

SPX800P when “VIDEO” is selected for the REC SIGNAL,

set the menu option GENLOCK to “EXT”. The option

GENLOCK is found on the GENLOCK screen, which is

accessible from the SYSTEM SETTING page.

MON OUT (monitor output) connector

This connector outputs the video signal to the monitor. The

video signals linked to the setting of the OUTPUT SEL

switch are output from here. Through an internal menu

option, the characters can be superimposed independently

of the VIDEO OUT connector. For more information, see [4-

9-2 Selecting Video Output Signals].

Connector cover

This cover must be removed in order to attach the optional

connector 1394. For directions on attaching the connector,

see the instruction manual for the optional connector 1394.

(To be supported in the near future.)

ECU REMOTE (remote control) connector

The extension control unit AJ-EC3P (optional accessory) is

connected here.

VIDEO OUT (video signal output) connector

This connector outputs video signals. The video signals

linked to the setting of the OUTPUT SEL switch are output

from here.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-SPX 800P Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info