Bedienungsanleitung Panasonic AJ-SPX 800P (Seite 85 von 116) (Englisch)

597960

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

7-1-3 Inspecting the Memory Recording

Functions

Make sure you successively carry out the inspections from [1.

Inspecting the P2 Card Recording] to [4. Inspecting the

Earphone and Speaker].

1. Inspecting the P2 Card Recording

1 Check on the display inside the viewfinder that the

remaining P2 card recording capacity is sufficient. Please

refer to [P2 Card Remaining Free Space/capacity

Indication] for information about P2 card remaining

recording capacity.

2 Set the TCG switch to [R-RUN].

3 Set the DISPLAY switch to [TC].

4 Press the camera’s REC START/STOP button to check the

following items:

z The P2 access LED blinks in orange.

z The REC lamp inside the viewfinder lights up.

z System warnings do not appear inside the viewfinder.

5 Press the camera’s REC START/STOP button again.

This step confirms that the P2 access LED is on and

showing orange, and the REC lamp in the viewfinder is

turned off.

6 Using the REC button on the handle, repeat Steps 4 to 5 to

check the same operation. Check the VTR button on the

lens in the same way.

7 Press the LIGHT button to check that the screen brightness

in the display window increases.

8 Press the PLAY button to check that the clip that has just

been shot is played back from the beginning.

Check that recording and playback operate properly.

9 When multiple P2 cards are inserted into the P2 card slots,

press the USER MAIN button to select the P2 card used for

recording.

Repeat the operations in Steps

4 to 5 and 8 to check that

recording and playback operate properly.

2. Inspecting the Audio Level Automatic Adjustment

1 Set the AUDIO SELECT CH1 and CH2 switches to [AUTO].

2 Set the AUDIO IN CH1 and CH2 switches to [FRONT].

3 Aim the microphone connected to the MIC IN jack at an

appropriate sound source. Then, check that the level

displays for both CH1 and CH2 change according to the

sound level.

3. Inspecting the Audio Level Manual Adjustment

1 Set the AUDIO IN CH1 and CH2 switches to [FRONT].

2 Set the AUDIO SELECT CH1 and CH2 switches to [MAN].

3 Turn the AUDIO LEVEL CH1 and CH2 controls.

Check that the level display increases when the controls

are turned to the right.

4. Inspecting the Earphone and Speaker

1 Turn the MONITOR control to check that the speaker

volume changes.

2 Connect an earphone to the PHONES jack.

Check that the speaker is turned off and the microphone

sound can be heard from the earphone.

3 Turn the MONITOR control to check that the earphone

volume changes.

5. Inspection for Using an External Microphone

1 Connect an external microphone to the AUDIO IN CH1 and

CH2 connectors.

2 Set the AUDIO IN CH1 and CH2 switches to [REAR].

3 Set the LINE/MIC/+48V selector switches on the rear panel

to [MIC] or [+48V], depending on the power supply type of

the external microphone.

MIC: For a microphone with internal power supply.

+48V: For a microphone with external power supply.

4 Aim the microphone at a sound source. Then check that the

audio level meter in the display window and the audio level

display inside the viewfinder change according to the sound

level.

The channels can also be checked separately by

connecting a single microphone to each channel.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic AJ-SPX 800P Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info