Bedienungsanleitung Panasonic BB-HCM527 (Seite 2 von 2) (Englisch)

628369

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

7. When [Setup completed] is displayed, click [To Single

Camera page].

• If the following ActiveX

Controls dialog is displayed, click [Install ActiveX Control...].

• When the following Security Warning is displayed, click [Install].

• The camera image is displayed.

8. Click the [Setup] tab, click [Date and Time] on the left

side of the screen, then set the camera’s date and

time. Click [Save] when finished.

• Screen content varies by model number.

To configure the camera for access from the Internet or from a mobile

phone, continue with the following steps.

Note:

• In order to configure the camera for access over the Internet using these instructions, your

router must be UPnP

™

compatible and must have its UPnP

™

feature turned on (it is turned

off by default on most routers). For more information, refer to the operating instructions

included with your router.

• To configure the camera for access over the Internet using a router that does not support

UPnP

™

, refer to Section 4 Configuring the Camera for Access from the Internet in the

Operating Instructions on the CD-ROM for general information, and refer to the operating

instructions included with your router.

• Disable the maximum idle time setting on your router if you have a PPPoE or PPTP

connection to your Internet Service Provider.

1. Click the [Internet] tab at the top of the camera screen.

2. Select [Enable] under [Auto Port Forwarding (IPv4)],

select [Register with Viewnetcam.com] under

[Viewnetcam.com Registration], then click [Save].

• When the dialog about the camera’s port number changing is displayed, click [OK].

• The camera and router will begin configuring themselves via UPnP

™

• If you select to register with Viewnetcam.com, click [Go to Viewnetcam.com

Registration page] when it is displayed. The Viewnetcam.com website will open

automatically. Follow the on-screen instructions to register.

3. When [Auto Port Forwarding setup is complete.] is

displayed, click [To Single Camera page].

• If you enabled [Auto Port Forwarding (IPv4)], the camera’s port number may have

changed. Do not forget the addresses displayed here.

• To confirm that the camera can be accessed from the Internet using a PC, use a PC

not connected to your network and access the camera using the address displayed

here.

• The IP address or URL used to access the camera over the Internet will also be

displayed on the [Status] page of the [Maintenance] tab.

The CD-ROM includes a single camera version of the Panasonic Network

Camera Recorder with Viewer Software. Click [Manual] on the Network

Camera Setup Program window for details about the installation and

operation of this software.

1. Insert the included CD-ROM into your PC.

• The Setup Program starts. If the program does not start, double-click Setup.exe found

on the CD-ROM.

2. Click [Network Camera Recorder with Viewer Software

Single Camera Version Installation].

3. Follow the on-screen instructions to install the

software.

4. When installation is complete, double-click the

shortcut icon (shown below) on your desktop to start

the software.

Note:

• Network Camera Recorder with Viewer Software Single Camera

Version is compatible with Microsoft

Windows Vista

, Windows

XP and Windows Server

2003.

• Camera registration is limited to one camera.

• Support is not provided for the single camera version of this

software.

The camera’s IP address is displayed. This is the

IP address you must enter in your web browser to

access the camera. Do not forget this address.

This will install the viewer program (ActiveX

Controls) needed to display camera images

properly. Viewer programs must be installed to

view MPEG-4 images, MJPEG images, and to use

audio features.

Congratulations! You have successfully set up the

camera and can now view camera images.

For more information, refer to 5.4 Setting the Date

and Time in the Operating Instructions on the

CD-ROM.

If you do not wish to configure the camera for access from the

Internet, you can stop here. Return to the Installation Guide and

follow the instructions for mounting the camera.

Access from Internet Configuration

If you are interested in accessing your camera over

the Internet, we recommend using

Viewnetcam.com. Viewnetcam.com is a Dynamic

DNS service designed for use with Panasonic

Network Cameras, and is provided free of charge.

For more information about Viewnetcam.com,

refer to the Viewnetcam.com website

(http://www.viewnetcam.com) for information

about this service.

The camera’s IP addresses for local (LAN) and

Internet access are displayed. These are the IP

addresses you must enter in your web browser to

access the camera over the LAN or from the

Internet. Do not forget these addresses.

Camera setup is now complete. If you have any difficulty

accessing the camera or viewing camera images, refer to the

Troubleshooting Guide on the CD-ROM, otherwise return to the

Installation Guide and follow the instructions for mounting the

camera.

Installing the Network Camera Recorder with Viewer

Software Single Camera Version

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic BB-HCM527 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic BB-HCM527

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info