Bedienungsanleitung Panasonic BB-HCM547 (Seite 1 von 2) (Englisch)

628370

Zoom out

Zoom in

Vorherige Seite

1/2

Nächste Seite

1. Insert the included CD-ROM into your PC.

• The Setup Program starts. If the program does not start, double-click Setup.exe found

on the CD-ROM.

2. Click [Search for Cameras].

• The program searches for cameras connected to your network.

If [Windows cannot open this file] is displayed after clicking [Manual]

[Select the program from a list]

→

[OK]

→

Check [Always use the selected program to open this

kind of file]

→

[Browse]

→

Browse to [C:\WINDOWS\system32\mshta.exe]

→

[Open]

→

[OK]

3. When the Windows Security Alert is displayed, click

[Unblock].

• If the dialog is not displayed, continue to the next step.

4. Select the camera you want to configure, and click

[Access Camera].

• If you have more than one camera, you can distinguish cameras by model number,

printed on the front of the camera, or by MAC address (see “Camera Diagram” on

page 2 of the Installation Guide to find your camera’s MAC address label).

• If more than 20 minutes have passed since the selected camera was turned on, you

cannot configure the camera. Turn off the camera, then turn it on again. This restriction

does not apply to cameras which have not been configured yet or have been reset to

their factory default settings.

• If you are using firewall or antivirus software on your PC, the Setup Program may not

be able to find any cameras on your network. If you cannot disable your firewall or

antivirus software, you can configure the camera by entering its MAC address (see

“Camera Diagram” on page 2 of the Installation Guide to find your camera’s MAC

address label).

5. Enter the desired user name and password, then click

[Save].

• Do not forget the user name and password you set here, otherwise you will need to

reset the camera and configure it again.

6. Enter the user name and password, then click [OK].

• [About this program]: Displays the program’s

version information.

• [Search for Cameras]: Displays a list of cameras

connected to your network.

• [Manual]: Allows you to view the included

documentation. PDF versions of the printed

documentation are included on the CD-ROM;

Adobe

Reader

is required to view them.

• [Update Firmware]: Allows you to use the Setup

Program to update the camera’s firmware (built-in

software).

• [Save Settings to PC/Save Settings to Camera]:

Allows you to save a backup of all camera settings

on your PC, or restore all settings in the camera

using a backup file saved on your PC.

• [Network Camera Recorder with Viewer Software

Single Camera Version Installation]: Installs the

[Network Camera Recorder with Viewer Software

Single Camera Version] software. (See “Installing

the Network Camera Recorder with Viewer Software

Single Camera Version” on page 2.)

• [Exit]: Closes the screen and exits the Setup

Program.

To assign all network settings to the camera

manually, or to assign an IP address using the

DHCP feature of your router, click [Network

Settings], then select [Specify an IP Address] or

[DHCP] and enter the appropriate settings.

If you are using a French, German, Italian,

Spanish, Russian, Simplified Chinese, or

Japanese language OS, this screen will be

displayed in the corresponding language, and all

subsequent camera screens will be displayed in

that language.

Before Reading this Document

This manual is written for both the BB-HCM527 (Indoor Use Only) and the

BB-HCM547 (Outdoor Ready). Available features and operations vary

slightly depending on the model. You can confirm the model no. of your

camera by checking the model no. printed on the front of the camera.

Model number suffixes (“A” and “CE”) are omitted from the following model

numbers shown in this document, unless necessary.

BB-HCM527A, BB-HCM527CE, BB-HCM547A, BB-HCM547CE

Make sure you have read the Important Information document and

followed the instructions in the Installation Guide for connection your

camera.

• Before following the instructions in this document:

– Confirm that your camera is turned on and connected to your router.

– Temporarily disable any firewall or antivirus software on your PC.

– Close your web browser.

• Screen shots shown in this document are for reference only and may vary from what is

displayed on your PC depending on the camera model, network settings, etc.

Abbreviations

• UPnP is the abbreviation for “Universal Plug and Play”.

• The Network Camera is referred to as “the camera” in this document.

• The Setup CD-ROM is referred to as “the CD-ROM” in this document.

Trademarks

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

• Microsoft, Windows, Windows Vista, Windows Server, ActiveX, and Internet Explorer are

either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

• Screen shots reprinted with permission from Microsoft Corporation.

• All other trademarks identified herein are the property of their respective owners.

• This software is based in part on the work of the Independent JPEG Group.

Setup Guide

Network Camera

(PoE Ready)

Model No.

BB-HCM527

BB-HCM547

Indoor Use Only

Outdoor Ready

PQQX16399YA KK0608CM1020

Please read this document before using the product, and save this document for future

reference.

Panasonic Network Camera Website:

http://panasonic.net/pcc/ipcam/

Panasonic BB-HCM547 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic BB-HCM547

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info