Bedienungsanleitung Panasonic BT-LH1700W (Seite 21 von 30) (Englisch)

99985

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

The underlined values are factory preset setting values.

“AUTO” is set when the monitor is shipped from the factory, but if there are concerns about noise etc. from outside the

input signal, we recommend assigning specific format.

g COMP.

The following menus are switched by selecting “RGB-COMP.” in “YP

BPR/RGB” in the “INPUT SELECT” menu.

The underlined values are factory preset setting values.

*1 “EXECUTING” is displayed while “AUTOSETUP” is being executed, and “COMPLETE” is displayed when

“AUTOSETUP” is completed.

If “AUTOSETUP” cannot be completed, “INCOMPLETE” is displayed.

*2 Each RGB-COMP. input compatible format can be adjusted.

INPUT SELECT

Sub menu Settings Explanation

VIDEO / Y/C

<AUTO>

<NTSC>

<PAL>

Used to select the input format for VIDEO and Y/C input.

<AUTO> Either NTSC or PAL is automatically selected.

<NTSC> NTSC <PAL> PAL

NTSC SETUP

<75>

<00>

Selects the NTSC setup level.

<75> Select this when using with a setup signal of

7.5 IRE. (The inner parts of the monitor are set

to the 7.5 IRE setup level to suit the black level)

<00> Select this when there is no setup level signal.

BPR/RGB

<YP

BPR>

<RGB-VIDEO>

<RGB-COMP.>

Selects either YP

BPR (Component) or RGB input mode.

<YP

BPR> Selects the YPBPR signal.

<RGB-VIDEO>

Selects the video RGB signal.

<RGB-COMP.>

Selects the PC RGB signal.

COMPONENT

LEVEL

<SMPTE>

<B75>

<B00>

Selects YP

BPR (Component) signal input level.

<SMPTE> When the signal level specified in SMPTE is

Chroma 100 IRE P

B, PR = 0.7 Vp-p.

<B75> Select this when connecting a betacam or

simliar devices set to 7.5 IRE. (The inner parts

of the monitor are set at 7.5

IRE

setup level to

suit the black level)

<B00> Select this when connecting a betacam or similar

devices that are not setup to the IRE level.

RGB SYNC

<G-ON>

<EXT>

Selects the SYNC when using RGB-VIDEO input.

<G-ON> Select when a synchronizing signal is

superimposed on the G signal.

<EXT> Select when an external synchronizing signal is

received in synchronization.

COMP.

Performs analog PC settings. (Refer to “COMP.” below)

Sub menu Settings Explanation

AUTOSETUP *1 Screen automatic adjustment is performed when “RGB-

COMP.” is selected in “YP

BPR/RGB” in the “INPUT SELECT”

menu. “AUTOSETUP” is performed if a different screen is

displayed, and “YES” is selected.

H POSITION

<0–60>

(Factory preset settings: 30)

Used to adjust the picture display position in the horizontal

direction.

V POSITION

<0–60>

(Factory preset settings: 30)

Used to adjust the picture display position in the vertical

direction.

PHASE

<0–31>

(Factory preset settings:

J page 22)

Used to adjust the clock phase with 1/32 clock phases.

CLOCK

<700–1800>

(Factory preset settings:

J page 22)

Used to adjust the sampling clock in dot units.

WXGA/XGA

<XGA>

<WXGA>

Switches between WXGA and XGA.

Main Menu (continued)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic BT-LH1700W Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info