164754
17
Zoom out
Zoom in
Vorherige Seite
1/114
Nächste Seite
DFX-444 Operator’s Manual Issue 3
10
far side of the test piece and reflect back to the transducer/probe
where they are converted into electronic signals and a measurement
is obtained. This technique, derived from sonar and radar, has been
widely applied to nondestructive inspection and dimensional
measurement processes.
4.1 Discontinuity Considerations
The size and geometric shape of the discontinuity relative to the
sound beam size and directivity are also factors that affect the
sensitivity of the test. As the sound beam enters the material, it
spreads and becomes weaker. Therefore, discontinuities farther
from the transducer or front surface of the test part produce a
lower response from the system. This can be overcome by
selectively adjusting the gain of the instrument as a function of
distance traveled through the use of the DFX-444’s Time
Corrected Gain feature. In addition, discontinuities which present
their predominant planar surface to the axis of the sound beam will
produce larger reflections than those which only present an edge
to the sound beam. Some knowledge of these factors along with
an understanding of how discontinuities are formed in the test part
are important for the proper use and effectiveness of this
instrument.
4.2 Ultrasonic Transducer/probes & Sound Fields
The transducer/probe comprises a piezoelectric ceramic material
that generates short bursts of mechanical vibration or sound
waves when it is excited by a short electrical pulse from the DFX-
444. The frequency of the generated sound waves is far beyond
the range of human hearing and can be in the range of 0.1 to 20
MHz. Sound energy at these high frequencies does not travel well
through air. For this reason, a coupling which in most cases is
liquid, must be used between the transducer/probe and the test
piece.
Higher frequency transducer/probes are more sensitive to small
discontinuities due to their smaller wavelength. The wavelength if
17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic cq dfx444 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info