27
CQ-RDP472N
24
E
N
G
L
I
S
H
¡This unit can be connected to an optional CD changer (CX-
DP9061/DP9060EN, CX-DP88N, CX-DP801/DP803EN, CX-
DP601EN or CX-DP1212N) and optional extension cord.
¡For details consult your nearest authorized Panasonic Dealer.
¡For connection to a CD changer, refer to the operating
instructions of the CD changer
(CX-DP9061/DP9060EN, CX-
DP88N, CX-DP801/DP803EN, CX-DP601EN or CX-DP1212N).
Telephone Mute: The sound from the speakers cannot be
heard while the telephone conversation is in progress.
Navi Mute: The sound from the speakers cannot be heard
while the navigation guide is on.
C1 : External Mute Lead (Orange)
Telephone Mute: Connect to the car telephone mute lead.
Note: The telephone mute lead is only for connection to the
radio mute lead. Output other than telephone will not be muted
Navi Mute: To the Navi Mute lead of the Panasonic car navigation
system.
e Power
Connector
(Orange)
ISO Connector A (Black)
ISO Connector B (Brown)
A8 (Black)
A7 (Red)
A4 (Yellow)
Fuse (15 A)
Resistor (1 kΩ)
A5 (Blue)
B8 (Green w/black stripe)
B7 (Green)
B6 (White w/black stripe)
B5 (White )
B4 (Gray w/black stripe)
B3 (Gray)
B2 (Violet w/black stripe)
B1 (Violet )
A5* (Blue)
B8 : Rear Left –
B7 : Rear Left +
B6 : Front Left –
B5 : Front Left +
B4 : Front Right –
B3 : Front Right +
B2 : Rear Right –
B1 : Rear Right +
Speakers
CD Changer
CX-DP88N
Battery Lead (Yellow)
To the car battery, continuous +12 V DC
Ground Lead (Black)
To a clean, bare metallic part
of the car chassis
Fuse (3 A)
Extension Cord
(DIN/BATT/RCA/GND)
DIN Cord
A5* : Motor Antenna Relay Control Lead (Blue)
To Motor Antenna (Max. 500 mA)
*
. This lead is
not intended for use with a switch actuated
power antenna.
Note: The power antenna extends automatically
when the power of this unit is turned on.
A7 : Power Lead (ACC or IGN) (Red)
To ACC power, +12 V DC.
A8 : Ground Lead (Black)
To a clean, bare metallic part of the car chassis.
A4 : Battery Lead (Yellow)
To the car battery, continuous +12 V DC.
A5* : Amp
.
Relay Control Power Lead (Blue)
(Max. 500 mA)* This lead is for connection to
a Panasonic power amplifier.
A5*: This lead can be used as either Amp
.
Relay Control Power Lead or Motor Antenna Relay Control Lead, or both at
the same time. However, the current capacity of this lead is 500 mA.
