YGFM286048A FT1007-2117 Printed in China
Panasonic Consumer
Electronics Company,
Division of Panasonic
Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company,
Division of Panasonic Puerto
Rico, Inc. (“PSC”)
Ave. 65 de Infanteria, Km. 9.5
San Gabriel Industrial Park,
Carolina, Puerto Rico 00985
http://www.panasonic.com
Panasonic Canada Inc.
5770 Ambler Drive,
Mississauga, Ontario
L4W 2T3
http://www.panasonic.ca
© 2007 Matsushita Electric Industrial Co., Ltd. All Right Reserved.
Specifi cations
General
Power supply : DC 12 V (11 V – 16 V DC), test
voltage 14.4 V, negative ground
Current consumption : Less than 2.1 A
(CD mode; 0.5 W x 4 channels)
Maximum power output : 50 W x 4 channels (at 1 kHz),
volume control maximum
Tone/SQ adjustment range : SQ Low/Bass: ±12 dB
(at 60 Hz, 80 Hz, 100 Hz, 200 Hz)
SQ Mid: ±12 dB
(at 500 Hz, 1 kHz, 2 kHz, 3 kHz)
SQ High/Treble: ±12 dB
(at 10 kHz, 12 kHz, 15 kHz, 18 kHz)
Speaker impedance : 4 – 8 j
Pre-amp output voltage : 2.0 V (CD mode, 1 kHz, 0 dB)
Pre-amp output impedance : 200 j
USB Connector \CQ-RX400U\
USB Standard Compatibility
: 1.1/2.0 Full Speed
Maximum Supply Current : 500 mA
Front AUX input
Input impedance : 10 kj
Allowable external input : 2.0 V
Connector : 3.5 mm Stereo mini-pin
Dimensions (W x H x D) : 178 x 50 x 160 mm
{7\ x 1 15/16\ x 6 5/16\}
Weight : 1.2 kg {2 lbs. 10 oz}
Disc Player
Sampling frequency : 8 times oversampling
DA converter : 1 bit DAC System
Pick-up type : Astigma 3-beam
Light source : Semiconductor laser
Wave length : 790 nm
Frequency response : 20 Hz – 20 kHz (±1 dB)
Signal to noise ratio : 96 dB
Total harmonic distortion : 0.01 % (1 kHz)
Wow and fl utter : Below measurable limits
Channel separation : 85 dB
FM Radio
Frequency range : 87.9 MHz – 107.9 MHz
Usable sensitivity : 10.2 dBf. (0.9 μV, 75 j)
50 dB quieting sensitivity : 15.2 dBf. (1.6 μV, 75 j)
Frequency response : 30 Hz – 15 kHz (±3 dB)
Alternate channel selectivity : 75 dB
Stereo separation : 35 dB (at 1 kHz)
Image rejection ratio : 55 dB
IF rejection ratio : 100 dB
Signal/noise ratio : 62 dB
AM Radio
Frequency range : 530 kHz – 1 710 kHz
Usable sensitivity : 27 dB/μV (22 μV, S/N 20 dB)
Above specifi cations comply with EIA standards.
Power Output:
18 W RMS x 4 Channels at 4 j and 1% THD+N
Signal to Noise Ratio:
85 dBA (reference: 1 W into 4
j)
Notes:
• Specifi cations and design are subject to modifi cation without
notice due to improvements.
• Some fi gures and illustrations in this manual may be different
from your product.
