Bedienungsanleitung Panasonic DMC-GF1 (Seite 35 von 196) (Englisch)

679617

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

VQT2G56

Preparation

• If there are any white saturated areas, we

recommend compensating the exposure towards

negative (P66) referring to the histogram (P60) and

then taking the picture again. It may result in a better

quality picture.

• There may be white saturated areas if the distance

between the camera and the subject is too close

when taking pictures with the flash.

If [HIGHLIGHT] is set to [ON] in this case, the area directly illuminated by the photo flash will

become white saturated and appear blinking in black and white.

• The LCD/EVF will display overexposed portions of the image as white blinking areas. These

only exist on the camera’s display, not on the actual photo.

• This does not work while in Multi Playback (P53), Calendar Playback (P54), or Playback Zoom

(P54).

• Adjust the brightness of the screen with 3/4, contrast and saturation

with 2/1 or the rear dial.

• When [DISPLAY] is pressed in screen shown right, it will switch to the

colour adjustment screen. Adjust between red and green with 3/4, or

between orange and blue with 2/1 or the rear dial.

Press [MENU/SET] to return to the LCD adjustment screen.

• It will adjust the LCD monitor when the LCD monitor is in use, and the

viewfinder when optional external viewfinder is in use.

• The brightness of the pictures displayed on the LCD monitor is increased so some subjects

may appear differently from actuality on the LCD monitor. However, this does not affect the

recorded pictures.

• The LCD monitor automatically returns to normal brightness after 30 seconds when recording

in Power LCD mode. Press any button to make the LCD monitor bright again.

• If the screen is difficult to see because of light from the sun etc. shining on it, use your hand or

another object to block the light.

• The number of recordable pictures decreases in Auto Power LCD and Power LCD modes.

• [AUTO POWER LCD] cannot be selected when playing back pictures.

• [AUTO POWER LCD] is disabled during motion picture recording.

• When the menu screen is displayed in a dark environment etc., the LCD monitor becomes

darker even if [LCD MODE] is set to [OFF].

[HIGHLIGHT]

When the Auto Review function is activated or when playing back,

white saturated areas appear blinking in black and white.

[OFF]/[ON]

[MONITOR]/

[VIEWFINDER]

Brightness, colour, or red or blue tint of the LCD monitor/optional

external viewfinder is adjusted.

[LCD MODE]

These menu settings make it easier to see the LCD monitor when

you are in bright places.

[OFF]

„ [AUTO POWER LCD]:

The brightness is adjusted automatically depending on how bright

it is around the camera.

… [POWER LCD]:

The LCD monitor becomes brighter and easier to see even when

taking pictures outdoors.

[ON] [OFF]

LCD

DMC-GF1EB-VQT2G56_eng.book 35 ページ２００９年８月２５日　火曜日　午後６時５９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-GF1 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMC-GF1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info