Bedienungsanleitung Panasonic DMC-GF1 (Seite 173 von 196) (Englisch)

679617

173

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

173

VQT2G56

Others

Before cleaning the camera, remove the battery or disconnect the power plug from

the outlet. Then wipe the camera with a dry soft cloth.

• When the camera is soiled badly, it can be cleaned by wiping the dirt off with a wrung wet cloth,

and then with a dry cloth.

• Wipe off any dirt or dust on the zoom ring and the focus ring with a dry, dustless cloth.

• Do not use solvents such as benzine, thinner, alcohol, kitchen detergents, etc., to clean the

camera, since it may deteriorate the external case or the coating may peel off.

• When using a chemical cloth, be sure to follow the accompanying instructions.

∫ About dirt on the image sensor

This camera features an interchangeable lens system so dirt may get inside the camera

body when changing lenses. Depending on the recording conditions, dirt on the image

sensor may appear on the recorded picture.

Do not change lenses where there is a lot of dust, and always attach the body cap when a

lens is not attached to the camera, so that dirt or dust does not get inside the camera body.

Remove any dirt on the body cap before attaching it.

Removing dirt on the image sensor

The image sensor is very precise and delicate, so be sure to observe the following when

you do have to clean it yourself.

• Blow off the dust on the surface of the image sensor with a commercially available blower

brush. Be careful not to blow too strongly.

• Do not put the blower brush further inside than the lens mount.

• Do not let the blower brush touch the image sensor as the image sensor may get scratched.

• Do not use any objects except a blower brush to clean the image sensor.

• If you cannot remove the dirt or dust with the blower, consult the dealer or your nearest Service

Centre.

• Do not press the LCD monitor with excessive force. Uneven colours may appear on the LCD

monitor and it may malfunction.

• If the camera is cold when you turn it on, the picture on the LCD monitor/Optional external

viewfinder will be slightly darker than usual at first. However, the picture will return to normal

brightness when the internal temperature of the camera increases.

Cleaning

Dust reduction function

This unit has a dust reduction function that will blow off the debris and dust that have

affixed to the front of the imaging device. This function will function automatically when

the camera is turned on, but if you see dust, perform the [SENSOR CLEANING]

(P131) in the [CUSTOM MENU] menu.

About the LCD monitor/Optional external viewfinder

Extremely high precision technology is employed to produce the LCD monitor/Optional

external viewfinder screen. However there may be some dark or bright spots (red, blue

or green) on the screen. This is not a malfunction. The LCD monitor/Optional external

viewfinder screen has more than 99.99% effective pixels with a mere 0.01% of the

pixels inactive or always lit. The spots will not be recorded on pictures on a card.

DMC-GF1EB-VQT2G56_eng.book 173 ページ２００９年８月２５日　火曜日　午後６時５９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-GF1 Seite 173

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMC-GF1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info