452171
152
Zoom out
Zoom in
Vorherige Seite
1/200
Nächste Seite
VQT3A48
152
Playback/Editing
Note
The number of prints can be set from 0 to 999.
With a printer supporting PictBridge, the date print settings of the printer may take precedence
so check if this is the case.
It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
If the file is not based on the DCF standard, the print setting cannot be set.
[PRINT SET] cannot be set for motion pictures and pictures that were taken with the
[QUALITY] set to [ ].
You can set protection for pictures you do not want to be deleted by mistake.
For details about the icon display during Burst Picture Group playback, refer to P139.
1 Select [PROTECT] on the [PLAYBACK] Mode menu. (P55)
2 Press 3/4 to select the item and then press [MENU/SET].
When [SINGLE IN BURST GROUP] or
[MULTI IN BURST GROUP] is selected, press 3/4/2/1 to
select burst picture group, and press [MENU/SET] to proceed to
step
3.
When [CANCEL] is selected, see Cancelling all the [PROTECT]
settings
.
Cancelling all the [PROTECT] settings
1 Select [CANCEL] on the screen shown in step 2 and then press [MENU/SET].
2 Press 3 to select [YES] and then press [MENU/SET].
If you press [MENU/SET] while cancelling protection, the cancelling will stop halfway.
Note
The protect setting may not be effective on other equipment.
Even if you protect pictures on a card, they will be deleted if the card is formatted.
Even if you do not protect pictures on a card, they cannot be deleted when the card’s
Write-Protect switch is set to [LOCK].
P [PROTECT]
3
Select the picture, and then press
[MENU/SET].
When [MULTI] has been selected
Repeat these steps for each picture.
The settings are cancelled when
[MENU/SET] is pressed again.
Press [] to return to the menu screen.
[SINGLE] [MULTI]
Press 2/1 to select
the picture.
Press 3/4/2/1 to
select the pictures.
DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 152 ページ 2010年10月14日 木曜日 午後3時50分
152

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic DMC-GH2H wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic DMC-GH2H

Panasonic DMC-GH2H Bedienungsanleitung - Deutsch - 200 seiten

Panasonic DMC-GH2H Bedienungsanleitung - Holländisch - 200 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info