Bedienungsanleitung Panasonic DMC-GH2K (Seite 78 von 200) (Englisch)

452172

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

VQT3A48

Recording

• First burst speed has no relation with the transfer speed of the card.

• The burst speed values given above apply when the shutter speed is 1/60 or faster and when

the flash is not activated.

• The Burst Mode speed may become slower depending on the following settings.

– [SENSITIVITY] (P91)/[PICTURE SIZE] (P120)/[QUALITY] (P121)/[FOCUS PRIORITY]

(P131)/Focus Mode

• The picture size will be fixed to [S] when [SH] is set.

• Refer to P121 for information about RAW files.

∫ Focusing in Burst Mode

The focus changes depending on the setting for [FOCUS PRIORITY] (P131) in the

[CUSTOM] menu and the Focus Mode setting.

¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first

picture.

¢2 The burst speed may become slower because the camera is continuously focusing on the

subject.

¢3 Burst speed takes priority, and focus is estimated within possible range.

Note

•

We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the

shutter button pressed fully while taking pictures in Burst Mode. Refer to P172 for information

about the remote shutter.

• When the burst speed is set to [SH] or [H] (when the Focus Mode is [AFS] or [MF]), the

exposure and White Balance are fixed at the settings used for the first picture for the

subsequent pictures as well. Depending on the brightness of the subject, the second picture

and subsequent pictures may be brighter or darker. When the burst speed is set to [H] (when

the Focus Mode is [AFC]), [M] or [L], they are adjusted each time you take a picture.

• If you are following a moving subject while taking pictures in a place indoors, outdoors etc.

where there is a large difference between the light and shade (landscape), it may take time until

the exposure is stable. If burst is used at this time, the exposure may not become optimal.

• Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may

become slower.

• When set to [SH] or [H], the Auto Review function is activated regardless of the Auto Review

setting. (Will not hold) You cannot set the Auto Review function in the [SETUP] menu.

When set to [M] or [L], Live View is displayed between burst frames.

• When the flash is activated, you can take only 1 picture.

• Maximum of 3 films will be recorded depending on the Multi Film Bracket setting during

the Multi Film Bracket recording (P119).

It will automatically switch to [H] when set to [SH].

• The Burst Mode is disabled when White Balance Bracket or Aspect Bracket is set.

• The Burst Mode is disabled during recording of the motion pictures.

• The following functions cannot be used when the burst speed is set to [SH].

– [EX. TELE CONV.]/[DIGITAL ZOOM]/[LONG SHTR NR]/[MODE2] of [STABILIZER]/[ ],

[ ] or [ ] of [QUALITY]

Focus Mode Focus Priority Focus

AFS

At the first picture

OFF

AFC

¢1

Normal focusing

¢2

OFF

Predicted focusing

¢3

MF — Focus set with Manual Focus

DMC-GH2H&GH2K&GH2EB-VQT3A48_eng.book 78 ページ２０１０年１０月１４日　木曜日　午後３時５０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-GH2K Seite 78

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMC-GH2K

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info