Bedienungsanleitung Panasonic DMC-GH3H (Seite 266 von 319) (Englisch)

502086

266

Zoom out

Zoom in

Vorherige Seite

1/319

Nächste Seite

266

Others

∫ When using other commercially available external flashes without

communication functions with the camera (DMC-GH3)

•

It is necessary to set the exposure on the external flash. If you want to use the external flash in

Auto Mode, use an external flash that allows you to set the aperture value and the ISO

sensitivity to match the settings on the camera.

• Set to Aperture-Priority AE Mode or Manual Exposure Mode on the camera and then set the

same aperture value and ISO sensitivity on the external flash. (The exposure cannot be

compensated adequately due to the change on the aperture value in Shutter-Priority AE Mode

and the external flash cannot control the light adequately in Programme AE Mode because the

aperture value cannot be fixed.)

∫ Using a external flash by connecting with a flash synchro socket

•

You can use an external flash by connecting a synchro cable with a flash

synchro socket. The socket has a lock screw to prevent the cable falling off.

•

Remove the flash synchro socket cap by turning in the direction of the arrow.

• Be careful not to lose the flash synchro socket cap.

• The flash synchro socket has no polarity. You can use a synchro cable

regardless of its polarity.

• Use the flash with a synchronisation voltage of 400 V or less.

• Do not use the synchro cables with the length of 3 m (9.8 feet) or more.

• You can set the aperture value, the shutter speed and the ISO sensitivity on the camera even

when attaching the external flash.

• Some commercial external flashes have synchro terminals with high-voltage or reversed

polarity. Using such extra flashes may cause a malfunction or the camera may not operate

normally.

• If you use commercially available external flashes with communication functions other than the

dedicated one, they may not operate normally or they may be damaged. Do not use them.

• Even if the external flash is turned off, the camera may enter the external flash mode when the

external flash is attached. When you are not using the external flash, detach it.

• Do not open the built-in flash when an external flash is attached.

• The camera will become unstable when attaching the external flash, it is recommended to use

a tripod when taking picture.

• Detach the external flash when carrying the camera.

• When attaching the external flash, do not hold only the external flash because it may detach

from the camera.

• If you use the external flash when the White Balance is set to [ ] finely adjust the White

Balance depending on the picture quality. (P138)

• If you record at close range with a wide angle, light from the flash may be blocked by the lens,

darkening the lower part of the screen.

• Refer to P129 about the settings for the wireless flash.

• Read the operating instructions of the external flash for details.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-GH3H Seite 266

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMC-GH3H

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info