Bedienungsanleitung Panasonic DMC-LS1 (Seite 98 von 112) (Englisch)

679552

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

Others

VQT0Q58

∫ LCD monitor

1: The brightness of the screen

becomes dark or bright for a moment.

• This phenomenon appears when

pressing the shutter button halfway to

set the aperture value and does not

affect the recorded pictures.

2: The screen is too bright or dark.

• Adjust the brightness of the screen.

3: Some pixels are inactive or always lit

on the LCD monitor.

• These pixels do not affect the recorded

pictures.

This is not a malfunction.

4: Noise appears on the LCD monitor.

• In dark places, noise may appear to

maintain the brightness of the LCD

monitor.

This does not affect the pictures you are

recording.

5: A vertical red line appears on the LCD

monitor.

• This is called smear. It is specific to

CCD, not a malfunction. It appears

when the subject has a bright part. It is

recorded on motion images, but not

recorded on still pictures.

∫ Flash

1: Flash is not activated.

• Is the flash setting set to Forced OFF

[]?

– Change the flash setting. (P40)

• The flash is not activated when in

motion image mode [ ], [SCENERY],

[NIGHT SCENERY], or [FIREWORKS]

in scene mode (P57) is selected.

2: The flash is activated 2 times.

• When you select AUTO/Red-eye

reduction [ ], the first flash is

activated for red-eye prevention on the

subject (red-eye phenomenon) before

actually recording pictures. After the

first flash, the flash is activated again for

recording.

∫ Playback

1: Pictures being played are rotated and

displayed in an unexpected direction.

The camera has a function to

automatically rotate and display pictures

recorded by holding the camera

vertically.

(If you take pictures aiming the camera

up or down, the camera may recognize

that it is held vertically.)

• When [ROTATE DISP.] (P71) is set to

[OFF], you can display the pictures

without being rotated.

• You can rotate pictures with [ROTATE]

function (P71).

2: The picture is not played back.

• Is the mode dial set to playback [ ]?

• Is there a picture in the built-in memory

or the card?

When a card is not inserted, the picture

data in the built-in memory appear.

When a card is inserted, the picture

data in the card appear. (P20)

3: The picture played back looks rough.

Noise appears on the picture.

• Is the ISO sensitivity is high or is the

shutter speed slow?

– Decrease the ISO sensitivity. (P65)

– Set [PICT.ADJ.] to [NATURAL]. (P68)

– Take pictures in bright places.

∫ TV, PC and printer

1: The picture does not appear on the

television.

• Is the camera connected to the TV

correctly?

• Set the TV input to external input mode.

2: When connecting to a PC, pictures

cannot be transferred.

• Is the camera connected to the PC

correctly?

• Is the camera recognized by the PC

correctly?

• Set [USB MODE] to [PC]. (P83)

VQT0Q58ENG.book 98 ページ２００５年２月３日　木曜日　午後７時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-LS1 Seite 98

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info