Shooting
The picture cannot be recorded.
• Is the mode correctly set? (P20)
• Is there any memory capacity left on the built-in memory or the card?
→
Before recording, delete some pictures. (
P42)
The recorded pictures are pale.
• The picture can become whitish if there is dirt e.g. ngerprints on the lens.
→
If the lens is dirty, turn on the camera, eject the lens barrel (
P9) and gently wipe the
lens surface with a soft dry cloth.
The area around where the pictures were taken becomes dark.
• Was this picture taken with the ash at the close range when the zoom is near [W] (1×)?
→
Zoom in a little, and then take the pictures. (P37)
The recorded picture is too bright or dark.
→
Check that the exposure is correctly compensated. (
P53)
2 or 3 pictures are taken at one time.
→
Set other than [HI-SPEED BURST] (P61) in Scene Mode or set [BURST] (P78) to
[OFF].
The subject is not focused properly.
• The focus range varies depending on the Recording Mode.
→
Set the proper Recording Mode for the distance to the subject.
• Is the subject out of the focus range? (P31, 34 and 51)
• Have you taken a picture with jitter? (P36)
The recorded picture is blurred. The optical image stabilizer is not effective.
→
The shutter speed becomes slower when pictures are taken in dark places so hold
the camera rmly with both hands to take the pictures. (P30)
→
When taking pictures at a slow shutter speed, use the self-timer. (P52)
