61596
110
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
Connecting to other equipment
110
VQT0Y44
Connecting to a PictBridge-compliant Printer
By connecting the camera directly to a printer
supporting PictBridge via the USB connection
cable (supplied), you can select the pictures to
be printed or start printing on the LCD monitor.
Make the necessary settings on your printer
beforehand. (Read your printer’s operating
instructions.)
1
Turn on the camera and the
printer.
2
Set the mode dial to [ ].
• [PLEASE CONNECT TO THE PRINTER]
appears.
3
Connect the camera to a printer
via the USB connection cable A
(supplied).
• Connect the USB connection cable with
the [f] mark facing the [w] mark on
the [DIGITAL] socket.
• Hold
C and then insert or pull the USB
connection cable straight.
• Do not use any other USB connection
cables except the supplied one.
When you connect the camera to a printer without
setting the mode dial to
[]
, remove the cable,
set the mode dial to
[]
, turn the camera and
the printer off and on, and connect again.
If a card is not inserted when the camera is
connected to the printer, you can print the
picture data on the built-in memory. If a card is
inserted, you can print the picture data on it.
You cannot switch between the built-in memory
and the card while the camera is connected to
the printer. When you want to switch between
the built-in memory and the card, disconnect
the USB connection cable, insert (or remove)
the card and then connect the USB connection
cable to the printer again.
To print the age in [BABY1]/[BABY2] (P69) in
scene mode or the departure date for [TRAVEL
DATE] (P70), use the software [LUMIX Simple
Viewer] or [PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied) and print from the PC. For
information about this, refer to the separate
operating instructions for PC connection.
To find out more about PictBridge compliant
printers, contact your local dealer.
n To connect
A : USB connection cable (supplied)
B : AC adaptor (DMW-AC5; optional)
It may take time to print some pictures.
Therefore, we recommend using a battery with
sufficient power (P14) or the AC adaptor (DMW-
AC5; optional) when you connect to a printer.
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC5; optional).
A
C
B
110

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-dmc-lx2

Suche zurücksetzen

  • Es kommt die Meldung "Speicherkarte geschützt". Wie kann ich die Speicherkarte entsichern? Eingereicht am 30-3-2023 16:12

    Antworten Frage melden
  • Ich soll ein Reset auf meiner Camera DMC-LX2 machen? Eingereicht am 5-10-2019 14:22

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic DMC-LX2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic DMC-LX2

Panasonic DMC-LX2 Bedienungsanleitung - Deutsch - 136 seiten

Panasonic DMC-LX2 Bedienungsanleitung - Holländisch - 136 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info