61596
113
Zoom out
Zoom in
Vorherige Seite
1/144
Nächste Seite
Connecting to other equipment
113
VQT0Y44
*These items cannot be displayed when the
printer does not support the paper sizes.
• [PAGE LAYOUT]
(Possible layouts on the camera)
• An item cannot be selected if the printer
does not support the page layout.
n Layout printing
When printing a picture several times
on 1 sheet of paper
For example, if you want to print a picture
4 times on 1 sheet of paper, set [PAGE
LAYOUT] to [
J] and then set the
number of prints to 4 for the picture on
[NUM. OF PRINTS].
When printing different pictures on 1
sheet of paper
For example, if you want to print 4
different pictures on 1 sheet of paper, set
[PAGE LAYOUT] to 4-picture printing
[
J] and then set [NUM. OF PRINTS]
for the pictures to 1 in [MULTI SELECT]
(P111).
• Do not disconnect the USB connection
cable when the cable disconnection
warning icon [K] is indicated.
(Depending on the printer, the icon may
not be displayed.)
• If the remaining battery power becomes
low while the camera and the printer are
connected, the status indicator blinks and
the alarm beeps. If this happens during
printing, press [MENU/SET] and stop
printing at once. If not printing, disconnect
the USB connection cable.
• The camera is receiving an error
message from the printer when the [*]
indication lights orange during printing.
After finishing printing, make sure there
are no problems with the printer.
• If the total number of ordered prints or the
number of pictures set for print is large,
printing is performed at intervals. In such
cases, the number of remaining prints
shown on the display will differ from the
number of prints you set. The
discrepancy, however, does not indicate
an error.
• Date print, paper size and page layout
settings on the printer may have priority
over the same settings on the camera.
Check these settings on the printer as
well.
• When printing RAW format files, JPEG
pictures associated with RAW format files
will be printed.
When no associated JPEG picture exists,
printing may not be possible.
• When printing did not go normally, turn
the camera and the printer off and on.
• When the mode dial is set to a choice
other than print mode [ ], [USB MODE
CHANGED. PLEASE REMOVE THE USB
CABLE.] appears on the camera’s LCD
monitor. Set the mode dial back to [ ]
before disconnecting the USB cable.
Disconnect the cable after canceling
printing.
2/2*
CARD SIZE 54 mm×85.6 mm
10×15cm 100 mm×150 mm
4×6 101.6 mm×152.4 mm
8×10 203.2 mm×254 mm
LETTER 216 mm×279.4 mm
F
Settings on the printer are
prioritized.
G 1 page with no frame print
H 1 page with frame print
I 2 pages print
J
4 pages print
113

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

panasonic-dmc-lx2

Suche zurücksetzen

  • Es kommt die Meldung "Speicherkarte geschützt". Wie kann ich die Speicherkarte entsichern? Eingereicht am 30-3-2023 16:12

    Antworten Frage melden
  • Ich soll ein Reset auf meiner Camera DMC-LX2 machen? Eingereicht am 5-10-2019 14:22

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Panasonic DMC-LX2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Panasonic DMC-LX2

Panasonic DMC-LX2 Bedienungsanleitung - Deutsch - 136 seiten

Panasonic DMC-LX2 Bedienungsanleitung - Holländisch - 136 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info