Bedienungsanleitung Panasonic dmc-lz6 (Seite 100 von 120) (Englisch)

288075

100

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

Others

100

VQT1C39

4: The camera turns off immediately

after it is turned on.

• Are the batteries exhausted?

– Replace them with batteries which

have sufficient capacity. (When you

use Ni-MH batteries, charge them.)

– If you leave the camera on, the

batteries will be exhausted. Turn the

camera off frequently by using power

save mode (P21), economy mode

(P21), etc.

∫ Recording

1: The picture cannot be recorded.

• Is the mode dial correctly set?

• Is there any memory remaining on the

built-in memory or the card?

– Before recording, delete some

pictures. (P33)

2: The recorded picture is whitish.

The lens is dirty.

• The picture can become whitish if there

is dirt e.g. fingerprints on the lens. If the

lens is dirty, turn on the camera, eject

the lens barrel (P9) and gently wipe the

lens surface with a soft dry cloth.

3: The recorded picture is too bright or

dark.

• Check that the exposure is correctly

compensated. (P43)

4: 2 or 3 pictures are taken at one time.

• Is [BURST] in the [REC] mode menu

set to [ON]? (P66)

5: The subject is not focused properly.

• The focus range varies depending on

the recording mode.

Rotate the mode dial to set the proper

mode for the distance to the subject.

• Is the subject beyond the focus range of

the camera? (P24, 45)

• Have you taken a picture with jitter?

6: The recorded picture is blurred. The

optical image stabilizer is not

effective.

• The shutter speed will become slower

and the optical image stabilizer function

may not work properly when taking

pictures especially in dark places. In

this case, we recommend holding the

camera firmly with both hands when

taking pictures. (P24) When

[SLOW SHUTTER] (P67) is set, we

recommend using a tripod and the

self-timer (P42) when taking pictures.

7: The recorded picture looks rough.

Noise appears on the picture.

• Is the ISO sensitivity high or the shutter

speed slow?

(ISO sensitivity is set to [AUTO] when

the camera is shipped. Therefore, when

taking pictures indoors etc. the ISO

sensitivity increases.)

– Decrease the ISO sensitivity. (P62)

– Set [COL.MODE] to [NATURAL].

(P67)

– Take pictures in bright places.

• In [HIGH SENS.] (P50) in scene mode,

the resolution of the recorded picture

decreases slightly because of high

sensitivity processing.

This is not a malfunction.

8: The brightness or the hue of the

recorded picture is different from that

of actual scene.

• If recording under fluorescent light, the

brightness or the hue may change

slightly when the shutter speed

becomes fast. This occurs due to the

characteristics of fluorescent light. It is

not a malfunction.

VQT1C39ENG.book 100 ページ２００６年１２月２１日　木曜日　午前１０時５７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic dmc-lz6 Seite 100

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic dmc-lz6

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info