Bedienungsanleitung Panasonic DMC-TZ50 (Seite 30 von 47) (Englisch)

66183

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

30 VQT1R37 VQT1R37 31

Applications

Adding or changing access

points

Public LAN access points may be added, but please note that successful internet

connection with this camera via non-T-Mobile services cannot be guaranteed.

When using a wireless LAN router, please use one that is compliant with either the IEEE

802.11g or the IEEE 802.11b standard.

First, register your access point, then select it from the list to connect.

For information security reasons, we strongly recommend making encryption settings on your router

when using a home wireless LAN. Fixed IP address settings cannot be made on the camera itself.

Registering access point

You can register up to eight access points, including the ‘tmobile’ which comes preset.

Depending on the setting of the access point used, the screen requiring no settings may

not be displayed.

Check with your provider or network administrator if you do not know the ‘SSID’ (network

name), ‘network certification’ or ‘encryption key.’

Entering Wi-Fi mode (P.10)

Select ‘Wi-Fi SET’

Select ‘ACCESS POINT SET’

• To return:

Press [Q.MENU/ ]

Select ‘OTHER ACCESS POINT’

• To return:

Press [Q.MENU/ ]

Selecting an access point

Unregistered

Registered

( PUBLIC

Wi-Fi LAN)

( HOME

Wi-Fi LAN)

Signal strength (P.15)

• To return: Press ◄

• To scan again:

Press [DISPLAY]

• To change page:

Turn zoom lever

If the access point to be registered

on the list is not displayed, select

‘

MANUAL INPUT.’

• The signal strength display reflects

the strength status when the access

point was detected: as such, it may

not reflect the current strength. To

check the current signal strength,

press [DISPLAY], and search the

access point again.

Select access point type

• To return: Press [Q.MENU/ ]

If the displayed SSID (network name) is correct

Press ►

When ‘MANUAL INPUT’ has been selected,

press [MENU/SET], input SSID (up to 32 single-

byte alphanumerics), and select ‘EXIT’ and

confirm. (Character input → P.11) Press ► to

proceed to step

• To return: Press ◄

Go to step

if selecting a unregistered access point.

Select network certificate type

(Only displayed when ‘MANUAL INPUT’ or registered access point selected)

• To return: Press [Q.MENU/ ]

Network certification : Certification system for wireless LAN access

points

Encryption scheme : This is the system for encrypting the data. The

system which can be set will depend on the

network certification setting.

Network certificate Available encryption scheme

OPEN WITHOUT ENCRYPTION, or WEP

SHARED KEY WEP

WPA-PSK AES / TKIP

WPA2-PSK AES / TKIP

When using a ‘PUBLIC Wi-Fi LAN’, select the settings supplied by the

provider you are using for the ‘network certification,’ ‘encryption scheme’

and ‘encryption key’ settings; when using of a ‘HOME Wi-Fi LAN’, select

the same settings as the wireless LAN router settings.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-TZ50 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info