Bedienungsanleitung Panasonic DMC-ZS25 (Seite 153 von 163) (Englisch)

660938

153

Zoom out

Zoom in

Vorherige Seite

1/163

Nächste Seite

VQT4P14

Others

Q&A Troubleshooting

- 153 -

Recording (continued)

Cannot use [Auto Bracket].

●

Only enough memory for 2 pictures or fewer.

Recorded pictures appear coarse, or there is interference.

●

ISO Sensitivity is high, or shutter speed is low.

(Default [Sensitivity] setting is [AUTO] – interference may appear with indoor pictures.)

→ Lower [Sensitivity]. (→97)

→ Take pictures in brighter locations.

●

Camera set to [High Sens.] Scene mode, or [Burst] in [Rec] menu to or .

(Picture becomes slightly coarser in response to high sensitivity)

Striping or flicker may appear under lighting such as fluorescent lighting

and LED lighting fixture.

●

This is characteristic of MOS sensors which serve as the camera’s pickup sensors.

This is not a malfunction.

Brightness or coloring of recorded picture different from real life.

●

When recording under fluorescent or LED lighting fixture etc., increasing the shutter speed may

introduce slight changes to brightness and color. These are a result of the characteristics of the light

source and do not indicate a malfunction.

●

When recording subjects in extremely bright locations or recording under fluorescent lighting, LED

lighting fixture, mercury lamp, sodium lighting etc., the colors and screen brightness may change or

horizontal striping may appear on the screen.

Reddish horizontal streaks appear on the LCD monitor during recording.

●

This is characteristic of the MOS sensors, which serve as the camera's pickup sensors. The streaks

appear when the subject has a bright part. Some unevenness may occur in the surrounding areas,

but this is not a malfunction. It is recorded in motion pictures but is not recorded on still pictures.

●

It is recommended that you take pictures while taking care not to expose the screen to sunlight or

any other source of strong light.

Motion picture recording stops midway.

●

With some cards, access display may appear briefly after recording, and recording may end midway.

●

Use a card of SD Speed “Class 4” or higher for recording motion pictures. If recording stops even

when using a card of the recommended speed class, the data writing speed has dropped. If this

happens, we recommend backing up the data on the memory card and formatting it (→53).

Panorama picture recording stops before finishing.

●

If the pan motion of the camera is too slow, the camera assumes that the operation has been

aborted and stops recording.

●

If the pan motion of the camera is too shaky when it is moved toward the recording direction, the

camera stops recording.

→ To record panorama pictures, pan the camera in a small circular motion parallel to the recording

direction at a speed of approx. 8 seconds per revolution (guideline).

The subject cannot be locked. (AF track fails)

●

If the color of the subject is similar to that of its background, AF Tracking may not function. Set the

AF lock to the colors specific to the subject.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-ZS25 Seite 153

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info