Bedienungsanleitung Panasonic DMC-ZS3 (Seite 16 von 144) (Englisch)

99980

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

16 VQT1Z82 VQT1Z82 17

Inserting battery and card

(Continued)

Setting the clock

( The clock is not set when the

camera is shipped.)

Set REC/PLAY switch to before turning on power.

Turn on the power

‘PLEASE SET THE CLOCK’ will be displayed

when power is turned on for the first time.

While this message is displayed

Press ‘MENU/SET’

Select the setting item (year,

month, date, time, display order,

time display format), and set.

Select the

setting

item

Select the display format

Set the

date,

time, or

display.

• To cancel → Press

•

Setting example of display order and time display format

[M/D/Y] [24HRS]: 12:34 APR.15.2009

[D/M/Y] [AM/PM]: PM 12:34 15.APR.2009

[Y/M/D] [24HRS]: 2009.4.15 12:34

When set to [AM/PM], 0:00 midnight is AM 12:00,

and 0:00 noon is PM 12:00.

Set

Press ‘MENU/SET’

• Turn on power again and check time display.

(Time and date can be displayed by pressing

‘DISPLAY’ several times.)

REC/PLAY switch

Failure to set the date and time will cause the date/time to be improperly printed when printing

pictures in digital photo center or when using ‘TEXT STAMP’ (P.90).

Year can be set between 2000 and 2099.

After the time has been set, the date can be printed correctly even if the date is not displayed on the

camera screen.

To set local time at travel

destination

‘WORLD TIME’ (P.68)

Remaining battery and memory capacity

Pictures remaining ( P.124 P.126)

Displayed when no card inserted (pictures will be saved to built-in memory)

Remaining battery (only when using battery)

(flashes red)

If the battery mark flashes red (or status indicator flashed when LCD

monitor is off), recharge or replace battery. (P.13)

When in operation

(Card) or (Built-in memory) are illuminated red.

This means that an operation is in progress, such as the recording, reading, deleting,

or formatting of pictures. Do not turn off the power or remove the battery, card, or AC

adaptor (DMW-AC5PP, sold separately) (this may cause damage to or loss of data).

Do not subject the camera to vibrations, impact, or static electricity. Should any of these

cause camera operation to be terminated, attempt to perform the operation again.

It is recommended that you copy important pictures to your computer (as

electromagnetic waves, static electricity, or faults may cause data to be damaged).

For model numbers and types,

see http://panasonic.co.jp/pavc/global/cs (This Site is English only.)

Picture save destination (cards and built-in memory)

Pictures will be saved to a card if one is inserted, or to the built-in memory if not.

Compatible memory cards (sold separately)

The following SD standard-based cards (Panasonic brand recommended)

• SD memory cards (8 MB - 2 GB)

• SDHC memory cards (4 GB - 32 GB)

Can only be used with devices compatible with SDHC

memory cards. (Always read your device’s operating

instructions before proceeding)

•

Cards of over 4 GB may only be used if they have the SDHC logo.

Please reformat the card with this camera if it has already

been formatted with a computer or another device. (P.26)

If the switch on the card is set to ‘LOCK’, operations such as

formatting, recording, and deleting cannot be performed.

MultiMediaCards may also be used (for pictures only)

Built-in memory (approx. 40 MB)

Built-in memory is slower than SD memory card.

‘QVGA’ in ‘REC QUALITY’ (P.80) only can be available to record motion pictures in the built-in memory.

Clipboard pictures (P.81) are saved to built-in memory.

Pictures may be copied between cards and the built-in memory (P.98).

To change time setting

Select ‘CLOCK SET’ from

SETUP menu (P.21), perform

and .

• Clock settings will be saved for

approx. 3 months even after

battery is removed, provided

a fully-charged battery was

installed in camera for the 24

hours beforehand.

Switch

(LOCK)

3232

SD memory card/

SDHC memory card

(sold separately)

SDHC logo

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMC-ZS3 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info