Bedienungsanleitung Panasonic DMP-BD35 (Seite 33 von 48) (Englisch)

456584

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9243 or RQT9350

To select these options, perform steps 1–4 (> 30)

When other Panasonic products respond to this remote control

Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together.

“Network”

IP Address/DNS Settings (> 17)

≥Press [OK] to show the following settings.

Connection Test

— — — —

IP Address Auto Configuration (DHCP)

≥On ≥Off

IP Address

— — —. — — —. — — —. — — —

Subnet Mask

— — —. — — —. — — —. — — —

Default Gateway

— — —. — — —. — — —. — — —

DNS Auto Configuration (DHCP)

≥On ≥Off

Primary DNS

— — —. — — —. — — —. — — —

Secondary DNS

— — —. — — —. — — —. — — —

Auto Detect Connection Speed

≥On ≥Off

Connection Speed Setting

This is enabled only when “Auto Detect Connection Speed” is

turned “Off”.

≥10BASE Half Duplex

≥10BASE Full Duplex

≥100BASE Half Duplex ≥100BASE Full Duplex

Proxy Server Settings (> 18)

≥Press [OK] to show the following settings.

Reset to factory preset

≥Ye s ≥No

Proxy Address

(The initial setting is blank.)

Proxy Port Number

(The initial setting is “0”.)

“Others”

Off Timer

Select how long the unit remains on when it is not being

used.

≥2 Hours ≥6 Hours

≥Off

Remote Control Code

≥Set Code 1 ≥Set Code 2 ≥Set Code 3

Easy Setting

You can execute basic settings (“On-screen Language”, “TV

Aspect”, “Analog Audio Output” [BD55]).

≥Ye s ≥No

Restore Default Settings

This returns all values in the Setup menu and the on-screen

menu, except for “Remote Control Code”, “On-screen

Language”, “IP Address/DNS Settings”, “Proxy Server

Settings”, “DVD-Video Ratings” and “BD-Video Ratings” to

the default settings.

≥Ye s ≥No

DivX Registration [DivX] (> 24)

You need this registration code to purchase and play DivX Video-on-Demand (VOD) content.

Firmware Update (> 14)

≥Press [OK] to show the following settings.

Automatic Update Check

When this equipment remains connected to the Internet,

it will check for the latest firmware version when it is

turned on and you can update it if necessary.

≥On

≥Off

Update Now

You can update the firmware manually.

1 Press [SETUP].

2 Press [3, 4] to select “Others” and press [OK].

3 Press [3, 4] to select “Remote Control

Code” and press [OK].

4 Press [3, 4] to select the code (1, 2, or 3) and

press [OK].

To change the code on the remote control

While pressing [OK], press and hold the

numbered button ([1], [2] or [3]) for more than 5 seconds.

6 Press [OK].

When the following indicator

appears on the unit’s display and

you are unable to operate the unit

The unit’s remote control code

Press and hold [OK] and the

indicated number button at the

same time for more than 5 seconds.

Set Code 1

Set Code 2

Set Code 3

Remote Control Code

Press []and[OK]together

for more than 5 seconds on

the remote.

Settings

DMP-BD55_35PP-RQT9243_ENG.book 33 ページ２００８年８月２９日　金曜日　午前１０時２８分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD35 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD35

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info