Bedienungsanleitung Panasonic DMP-BD60 (Seite 18 von 52) (Englisch)

502343

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT9378

Network settings

Setting the connection speed

When the connection test results in “Fail” after the IP and DNS-IP

addresses are assigned, perform the following settings.

After performing steps 1–3 (> 17)

4 Press [3, 4] to select “Auto Detect

Connection Speed” and press

[2, 1] to select “Off”.

5 Press [3, 4] to select “Connection

Speed Setting” and press [2, 1] to

select a connection speed.

≥Select a connection speed in accordance with the environment of

the network connected.

≥When the settings are changed, the network connection may be

disabled depending on the device.

Testing of

“Proxy Server Settings”

Always test the connection when new “Proxy Server Settings” have

been made.

1 Press [SETUP].

2 Press [3, 4] to select “Network”

and press [OK].

3 Press [3, 4] to select “Proxy

Server Settings” and press [OK].

4 Press [3, 4] to select “Connection

Test” and press [OK].

“Testing”: The test is in progress.

“Pass”: The connection is completed.

Press [RETURN] to exit.

“Fail”: Please check the connection and settings.

Setting the proxy server

In most cases, default settings can normally be used without

making any changes.

Please use this setting when instructed to by your Internet

service provider.

After performing steps 1–3 (D above)

4 Press [3, 4] to select “Proxy

Address” and press [OK].

5 Press [3, 4, 2, 1] to select a

character and press [OK].

Text field: shows the text you have entered

Using the numbered buttons to enter characters

e.g., entering the letter “F”

1) Press [3] to move to the 3rd row.

2) Press [3] twice to highlight “F”.

3) Press [OK].

Repeat this step to enter other characters.

≥Press [;] to delete.

6 Press [∫] when you complete the

entry.

7 Press [3, 4] to select “Proxy Port

Number” and press [OK].

8 Enter numbers with the numbered

buttons and press [OK].

9 Press [2, 1] to select “Yes” and

press [OK].

≥The specified ports may be blocked and not be able to be used

depending on the network environment.

In order to restore the default settings

After performing steps 1–3

1) Press [3, 4] to select “Reset to factory preset” and press [OK].

2) Press [2, 1] to select “Yes” and press [OK].

RETURN

Proxy Server Settings

Reset to factory preset

Proxy Address

Proxy Port Number

Connection Test



Proxy Address

Space

Finish

Delete

RETURN

12345678 90

ABC

DEF

abc

def

ghi

jkl

+-*

#$&

<>@

mno

[]_

pqrs

()

tuv

{}

\ I

wxyz

“’:;

` ^

JKL

MNO

PQRS

TUV

WXYZ

0 -- 9

GHI













(

)



Proxy Port Number

Please input Proxy Server Port Number and

press [OK]. Press [CANCEL] to delete the

selected character. The number will be set to

"0" if all characters are deleted and [OK] is

pressed.

Num

ber

DMP-BD80_60PP-RQT9378_ENG.book 18 ページ２００８年１２月２２日　月曜日　午後８時２７分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD60 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info