Bedienungsanleitung Panasonic DMP-BD60 (Seite 33 von 52) (Englisch)

502343

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

RQT9378

To select these options, perform steps 1–4 (> 32)

(Continued on the next page)

“Audio”

Dynamic Range Compression [BD-V] [AVCHD] [DVD-V] [DivX]

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

Change the dynamic range (> 50) for late night viewing.

≥On ≥Off

≥Auto: Effective only when Dolby TrueHD is played.

Digital Audio Output (> 8)

≥Press [OK] to show the following settings.

Dolby D/Dolby D +/

Dolby TrueHD

Select whether Dolby Digital, Dolby

Digital Plus, Dolby TrueHD, DTS Digital

Surround, DTS-HD High Resolution

Audio or DTS-HD Master Audio is output

in “Bitstream” or “PCM” format.

≥Not making the proper settings may

result in noise.

≥If the unit is connected with the

HDMI AV OUT terminal, the

specifications of the connected

equipment take preference over this

unit and audio selected in these

items may not be output (e.g., when

a television is connected, the HDMI

audio output of this unit is limited to

down-mixed 2ch.)

≥Bitstream

Select “Bitstream” when the connected equipment can decode the

respective audio format.

–Connect equipment supporting HDMI (High Bit rate Audio) and use a

High Speed HDMI Cable in order to output high bit rate audio such as

Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio or

DTS-HD Master Audio.

≥PCM:

Select “PCM” when the connected equipment cannot decode the

respective audio format.

Refer to the operating instructions for connected devices to verify whether or

not they can decode each of the audio formats.

DTS/DTS-HD

BD-Video Secondary Audio

[BD-V]

Turn on/off the button click sound on the menu and audio with

secondary video in picture-in-picture mode. (> 22)

≥On

: The primary audio and secondary audio are mixed and output. The

sampling frequency is converted to 48 kHz.

≥Off: The button click sound on the menu and secondary audio are not

output.

PCM Down Conversion

Select how to output audio with a sampling frequency of 96 kHz.

≥Signals are converted to 48 kHz despite the settings across in

the following cases:

–when the signals have a sampling frequency of 192 kHz

–when the disc has copy protection

–when “BD-Video Secondary Audio” is set to “On”

≥On: Signals are converted to 48 kHz. (Choose when the connected

equipment cannot process signals with sampling frequency of

96 kHz.)

≥Off

: Signals are output as 96 kHz. (Choose when the connected

equipment can process signals with sampling frequency of

96 kHz.)

Downmix

Switch the downmix system for playing back multi-channel

surround sound.

≥When “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” is

set to “Bitstream”, there are no downmix effects for the outputted

audio.

≥The audio will be outputted in “Stereo” in the following cases.

–AVCHD playback

–Playback of button click sound on the menu and audio with

secondary video in picture-in-picture mode

≥Stereo

: When connected to equipment that does not support

the virtual surround function.

≥Surround encoded: When connected to equipment that supports the

virtual surround function.

High Clarity Sound [BD80 ]

When the analog video terminal is not being used, the electrical

current that flows through the analog video circuit can be stopped.

This prevents adverse effects on the audio signals and produces

clearer sound.

≥Set to “Enable” and then set “High Clarity Sound” on the

on-screen menu to “On”. (> 31)

≥Use this when outputting image via HDMI terminal. Analog image

will not be output via COMPONENT VIDEO OUT terminal or

VIDEO OUT terminal.

≥Enable ≥Disable

“Display”

Status Messages

Choose whether to show status messages automatically.

≥Automatic

≥Off

On-screen Language

Choose the language for these menus and on-screen messages.

≥English

≥Français ≥Español

Screen Saver Function

This is to prevent burn-in on the screen.

≥When this is set to “On”, the masked-off area on the screen

becomes gray.

[Only when connecting with an HDMI cable or a component video

cable and “HDMI Resolution” (> 34) is set to any other mode

than “480p”, or “Component Video Resolution” (> 34) is set to

“720p” or “1080i”]

≥On:

If there is no operation for 10 minutes or more, the displayed screen

switches to the other states automatically.

–When the Direct Navigator or FUNCTIONS menu is displayed, the

display returns to the screen saver mode.

–When CD or MP3 is played, the display returns to the screen saver

mode. (Playback continues.)

–When still pictures are shown (except for slideshow), the display returns

to the Direct Navigator screen.

≥Off

Settings

RQT9378~Body_mst.fm 33 ページ２００９年１月１５日　木曜日　午前１１時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD60 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD60

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info