Bedienungsanleitung Panasonic DMP-BD81 (Seite 29 von 36) (Englisch)

546105

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

SQT0108

Reference

I can’t connect to the network.

¾ Confirm the network connection and settings.

(> 10, 11, 24)

¾ There may be interference that prevents the

unit from detecting your home network. Place

the unit and the wireless router closer to each

other. This unit may be able to detect your

network name (> 12, “SSID”).

¾ Check the owner’s manuals for each device

and connect accordingly.

When using wireless LAN connection, video

from the DLNA Certified media server is not

played back or video frames are dropped

during playback. [BD901] [BD91]

¾ Higher transfer rate router such as 802.11n

(2.4 GHz) wireless router may solve the

problem. If you use 802.11n (2.4 GHz)

wireless router, it is necessary to set the

encryption type to “AES”.

Simultaneous use with a microwave, cordless

telephone etc. at 2.4 GHz may result in

connection interruptions or other problems.

¾ On the “Wireless Settings” screen (> 24), the

continuous lighting of at least 4 “Reception”

indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the

connection is being interrupted, change the

position or angle of your wireless router and

see if the connection state improves. If there

is no improvement, connect to a wired

network and perform the “Easy Network

Setting” (> 11) again.

Cannot play.

¾ You inserted an incompatible disc (Discs

recorded in PAL video, etc.).

Cannot display on this unit.

¾ You tried to play a non-compatible image.

¾ Re-insert the media.

No disc inserted.

¾ The disc may be upside down.

$ This operation is not available.

¾ Some operations are unsupported by the unit.

(For example, reverse slow motion, etc.)

IP address is not set.

¾ The “IP Address” in “IP Address/DNS

Settings” is “---. ---. ---. ---”. Set the “IP

Address”, “Subnet Mask”, and “Default

Gateway”. (Select the automatic address

acquisition if necessary.)

The current wireless network security setting

is weak. It is recommended to change to a

stronger security setting.

¾ Set a stronger network security level referring

to the wireless router owner’s manuals.

When the POWER LED is flashing, check the

message on the TV screen. If a message is not

displayed on the TV screen, determine the type of

the error by checking the way the POWER LED is

flashing.

Flashes 6 times

¾ The remote control and this unit are using

different codes.

Turn on this unit by using the standby/on

switch on this unit, and check “Remote control

” which is displayed on the screen when you

press a button on the remote control.

Press and hold [OK] and the displayed

number (“”) for at least 5 seconds.

Flashes

¾ The copyright protected disc cannot be

played back.

One of the devices connected to this unit (TV,

amplifier, etc.) does not support copyright

protection.

Flashes 3 times

¾ The disc in use cannot be played back since

the copyright information is invalid.

Network

Messages on the screen

POWER LED

DMP-BD91_81_SQT0108_eng.book 29 ページ２０１３年１２月３日　火曜日　午前１０時５０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BD81 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BD81

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info