Bedienungsanleitung Panasonic DMP-BDT360 (Seite 25 von 40) (Englisch)

546099

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SQT0080

Settings

¾ Contents Type Flag

Depending on the playback content, the TV will

output adjusting to the optimal method when a

TV that supports this function is connected.

¾ HDMI(SUB) Output Mode [BDT460]

Set to output the video from the HDMI AV OUT

SUB terminal or not.

A progressive image recorded at a rate of 24 frames per

second (motion-picture film). Many BD-Video movie

contents are recorded in 24 frames/second in accordance

with the film materials.

A high resolution image/display technology of

approximately 4000 (width)

k 2000 (height) pixels.

∫ Dynamic Range Compression

You can listen at low volumes but still hear

dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

≥ “Auto” is effective only when playing Dolby

TrueHD.

∫ Digital Audio Output

Press [OK] to show the following settings:

¾ Dolby D/Dolby D +/Dolby TrueHD

¾ DTS/DTS-HD

Select the audio signal to output.

≥ Select “PCM”, when the connected

equipment cannot decode the respective

audio format. This unit decodes the audio

format and transmits to the connected

equipment.

≥ If you do not make proper settings the audio

may be static or noisy.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.

¾ HDMI Audio Output

This setting selects whether or not to output

audio from HDMI.

≥ Select “Off” when the TV is connected to this

unit via HDMI AV OUT terminal, and this unit

is also connected to other devices, such as

an amplifier/receiver via an OPTICAL

terminal.

∫ PCM Down Conversion

Select how to output audio with a sampling

frequency of 96 kHz for the PCM output from the

OPTICAL.

≥ If “On” is selected, the signals that are

converted to 48 kHz are output.

≥ If “Off” is selected, and the connected

equipment does not support 96 kHz, the sound

will not be output normally.

≥ Signals are converted to 48 kHz despite the

settings in the following cases:

– when the signals have a sampling frequency

of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to

“On”

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the

connected equipment supports the virtual

surround function.

≥ The downmix effect is not available when

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the

following cases:

– AVCHD playback

– Playback of secondary audio (including the

button click sound).

∫ DTS Neo:6

2ch (2.1ch) audio is expanded to 7ch (7.1ch).

≥ This function works when the following

conditions are met:

– Audio is output from the HDMI AV OUT

terminal.

– Audio recorded at 96 kHz or lower is output.

– “Digital Audio Output” is set to “

PCM

” when

audio other than PCM is output.

Audio

DMP-BDT460_360_SQT0080_eng.book 25 ページ２０１３年１２月１９日　木曜日　午後３時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BDT360 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BDT360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info