Bedienungsanleitung Panasonic DMP-BDT360 (Seite 31 von 40) (Englisch)

546099

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SQT0080

Reference

The TV screen turns black.

¾ In the following cases, HDMI authentication

takes place and a black screen is displayed:

– When “24p Output” is set to “On”.

– When the display is switched between 2D

and 3D images.

– [BDT460] : When you quit the 4K playback of

a still picture by displaying another screen,

including the Home menu.

This unit does not recognize the USB

connection correctly.

¾ Disconnect and re-connect the USB cable. If

it still does not recognize the connection, turn

this unit off and on again.

¾ USB devices may not be recognized by this

unit when connected using the following :

– a USB hub

– a USB extension cable

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

The images from this unit do not appear on

the TV.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Resolution”. Reset the setting as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote

control until “04 PRG” is displayed on the

unit’s display.

4 Press and hold [OK] for more than 5 seconds.

Set the item again. (> 24)

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD

audio are not output properly,

select “Yes” in “Restore Default Settings”

(> 29) and make proper settings.

¾ When “3D BD-Video Playback” in the Setup

menu is set to “Auto”, images may not be

output depending on the connection method.

After removing the disc from this unit, select

“Set before play” in the Setup menu, and

select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 26)

¾ When outputting in 24p (4K), images may be

distorted depending on the HDMI cable. Use

an HDMI cable that supports 4K output.

Video is not output. [BDT460]

¾ Video from the HDMI AV OUT SUB terminal is

not output when the “HDMI(SUB) Output

Mode” is set to “V.OFF”. (> 25)

Video is not output in high-definition.

¾ Confirm that “HDMI Resolution” in the Setup

menu is set properly. (> 24)

3D video is not output.

¾ Connect to a full high-definition TV.

¾ Is there a non-3D compatible amplifier/

receiver connected between this unit and a

TV? (> 9)

¾ [BDT460] : If there is a non-3D compatible

amplifier/receiver connected to the HDMI AV

OUT SUB terminal, set the “HDMI(SUB)

Output Mode” to “V.OFF”. (> 10)

¾ Are the settings on this unit and the TV

correct? (> 18)

¾ Is the amplifier/receiver that is connected

between this unit and TV on?

¾ Depending on the connected TV, the video

being played back might switch to 2D video

due to changes in resolution etc. Check the

3D setting on the TV.

3D video is not output correctly as 2D.

¾ Select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 26, “3D

BD-Video Playback”)

¾ Discs that have recorded titles with Side by

side (2 screen structure) and that can be

enjoyed in 3D are played back in accordance

with the settings of the TV.

No subtitles.

¾ When progressive output is on, closed

captions/subtitles cannot be displayed.

The subtitles overlap closed captions

recorded on discs.

¾ Turn off the subtitles or the closed captions.

(> 22, 26)

Closed captions are not displayed.

¾ Confirm that the source content supports CC.

¾ Confirm the “Closed Caption Display” is set to

“On”. (> 23, 26)

¾ Change the “Closed Caption Type” setting.

(> 23, 26)

¾ Confirm the “Analog CC” or “Digital CC” is set

properly (> 23, 26).

Picture

DMP-BDT460_360_SQT0080_eng.book 31 ページ２０１３年１２月１９日　木曜日　午後３時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BDT360 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BDT360

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info