Bedienungsanleitung Panasonic DMP-BDT460 (Seite 32 von 40) (Englisch)

546100

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

SQT0080

A black band is displayed around the edge of

the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly.

(> 28)

¾ Adjust the aspect setting on the TV.

Cannot switch audio.

¾ The audio cannot switch, if “Digital Audio

Output” is set to “Bitstream”. Set “Digital

Audio Output” to “PCM”. (> 25)

Cannot hear the desired audio type.

¾ Check the connections and the “Digital Audio

Output” settings. (> 9, 25)

¾ [BDT460] : When connecting this unit to a TV

via an HDMI AV OUT MAIN and to an

amplifier/receiver via an HDMI AV OUT SUB,

set “HDMI(SUB) Output Mode” to “V.OFF”.

(> 10)

¾ To output audio from a device connected with

an HDMI cable, set “HDMI Audio Output” to

“On” in the Setup menu. (> 25)

There is no sound coming out from the TV.

[BDT460]

¾ Audio may not output from the TV when the

amplifier/receiver is connected to the HDMI

AV OUT SUB, and “HDMI(SUB) Output

Mode” (> 25) is set to “V.OFF”. In such a

case, output audio from the amplifier/receiver.

To output audio from the TV, set the

“HDMI(SUB) Output Mode” to “Normal”.

Disc cannot be played.

¾ The disc is dirty. (> 5)

¾ The disc is not finalized. (> 7)

¾ Confirm the “Mixed Data Disc Option” is set

properly. (> 28)

Still pictures (JPEG) do not play back

normally.

¾ The images that were edited on the PC, such

as Progressive JPEG, etc., may not be played

back.

I can’t play back BD-Live.

¾ Confirm that this unit is connected to the

broadband Internet. (> 11)

¾ Connect this unit to the network by a wired

connection.

¾ Confirm the “BD-Live Internet Access”

settings. (> 27)

¾ Confirm a USB device is connected to the

USB port. (> 14)

I can’t connect to the network.

¾ Confirm the network connection and settings.

(> 11, 12, 26)

¾ There may be interference that prevents the

unit from detecting your home network. Place

the unit and the wireless router closer to each

other. This unit may be able to detect your

network name (> 13, “SSID”).

¾ Check the owner’s manuals for each device

and connect accordingly.

When using wireless LAN connection, video

from the DLNA Certified media server is not

played back or video frames are dropped

during playback.

¾ Higher transfer rate router such as 802.11n

(2.4 GHz or 5 GHz) wireless router may solve

the problem. If you use 802.11n (2.4 GHz or

5 GHz) wireless router, it is necessary to set

the encryption type to “AES”.

Simultaneous use with a microwave, cordless

telephone etc. at 2.4 GHz may result in

connection interruptions or other problems.

¾ On the “Wireless Settings” screen (> 26), the

continuous lighting of at least 4 “Reception”

indicators is the target for a stable connection.

If 3 or fewer indicators are lit or the

connection is being interrupted, change the

position or angle of your wireless router and

see if the connection state improves. If there

is no improvement, connect to a wired

network and perform the “Easy Network

Setting” (> 12) again.

Audio

Playback

Network

DMP-BDT460_360_SQT0080_eng.book 32 ページ２０１３年１２月１９日　木曜日　午後３時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-BDT460 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-BDT460

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info