Bedienungsanleitung Panasonic DMP-UB900 (Seite 17 von 44) (Englisch)

641954

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Getting started

- 17 -

After connecting your new player for the first time

and pressing [Í], the basic settings screen will

appear.

Preparation

Turn on the TV and select the appropriate

video input.

1 Press [Í].

Setup screen appears.

2 Follow the on-screen instructions to

continue with the settings.

(e.g., “Quick Start”)

≥ Certain recent models of Panasonic TVs

(VIERA) may automatically apply their

language setting to this unit.

Follow the on-screen instructions to set the

format.



≥ To reconnect this unit to a 4K (50p or 60p)-compatible TV

after connecting this unit to a 2K-compatible TV and

completing “Easy Settings”, set “4K(50p/60p) Output” to

“4K(50p/60p) 4:4:4” or “4K(50p/60p) 4:2:0”. (> 29)

≥ If your wireless network is encrypted,

Encryption Key input screen will be displayed.

Input the encryption key of your network.

Settings

The following settings can be performed anytime

in the Setup menu. (> 32, 34)

Easy Settings

∫ When connected to a 4K (50p or

60p)-compatible TV

When connected to a 4K (50p or 60p)-compatible

TV, you can set the video output format.

Easy Network Setting

After completing “Easy Settings”, you can perform

“Easy Network Setting”.

Select “Wired” or “Wireless” and press [OK].

4K(50p/60p) Output

Start

Start connection check with your 4K TV.

Once connection check is started and if the video is not displayed

correctly, please wait for the next display. The connection check

could take up to 30 seconds to display the new message screen.

RETURN

∫ “Wired” connection

Follow the on-screen instructions to apply your

connection settings.

∫ “Wireless” connection

Before beginning wireless connection setup

≥ Obtain your network name (SSID*

≥ If your wireless connection is encrypted,

please be sure that you know your

encryption key.

Then follow the on-screen instructions and

apply the settings.

WPS (PUSH button):

If your wireless router supports

WPS (PUSH button), you can

easily perform the settings by

pressing WPS button on it.

WPS (Wi-Fi Protected Setup

) is a standard that

facilitates settings relating to the connection and

security of wireless LAN devices.

1 Press the green button on the remote control.

2 Press WPS button or corresponding button of

the wireless router until the lamp starts

flashing.

≥ For details, refer to the operating instruction

of the wireless router.

3 Select “Start”.

Search for wireless network:

≥ The available wireless networks will be

displayed on the screen.

Select your network name.

– If your network name is not displayed, search

again by pressing the red button on the

remote control.

– Stealth SSID will not be displayed when you

press the red button on the remote control.

Enter manually by using “Manual setting”.

(> 32)

Easy Network Setting

Wired

Wireless

Select a connection mode.

RETURN

e.g.

DMP-UB900_EG-SQW0698.book 17 ページ２０１６年３月７日　月曜日　午前１１時４６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-UB900 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-UB900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info