Bedienungsanleitung Panasonic DMP-UB900 (Seite 27 von 44) (Englisch)

641954

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

- 27 -

Playback

∫ Top Menu

Display Top Menu.

∫ Pop-up Menu

Display Pop-up Menu.

∫ Menu

Display Menu.

∫ Reception

The radio wave status during the playback of

DLNA is displayed. (Only when a wireless

connection is used)

These settings are also displayed by pressing

[PICTURE SETTING].

Switch “Set 1”, “Set 2” or “Standard” by using

[2, 1].

≥ You can register desired settings to “Set 1” and

“Set 2”. Settings for BD Video playback and

settings for the playback of other types of media

are registered separately.

(The default settings for “Set 1”/”Set 2” are the

same as the settings for “Standard”.)

≥ You cannot change the “Standard” settings.

∫ Display

Select a setting suitable for your screen.

∫ Picture Type

Select the picture quality mode during play.

∫ Sharpness Adjustment

Adjust the sharpness of images. The greater the

value is, the sharper images will be.

∫ Noise Reduction

Reduce unnecessary noise in videos. The　

greater the value is, the less noise will appear.

∫ Luminance/Colour Adjustment

Adjust the contrast, brightness, white gamma,

black gamma, colour saturation and hue.

∫ Bandwidth Limitation

Adjust the bandwidth limitations.

∫ Dynamic Range Conversion Adjustment

When connected to a TV that does not support

HDR (High Dynamic Range), this unit outputs

normal dynamic range signals that are converted

from HDR image signals. In this case, set the

maximum image contrast. If you set a smaller

value, their contrast will be reproduced more

faithfully, but the entire screen will appear darker.

To increase the brightness, set a larger value.

∫ 24p / 25p Conversion

Play back videos with film-like motion.

≥ When this unit is connected to a TV compatible

with 4K/24p or 4K/25p:

If “Video Format” (> 29) is set to “Automatic”,

videos will be output in 4K/24p or 4K/25p.

≥ When this unit is connected to a TV compatible

with 1080/24p or 1080/25p:

If “Video Format” (> 29) is set to “Automatic”,

“1080i” or “1080p”, videos will be output in

1080/24p or 1080/25p.

≥ Noise may appear on the image when you

switch the setting.

∫ Progressive

Select the method of conversion for progressive

output to suit the type of material being played.

≥ If the video is disrupted when “Auto” is selected,

select either “Video” or “Film” depending on the

material to be played back.

∫ Reset to Default Picture Settings

Return “Picture Settings” of the selected tab (“Set

1” or “Set 2”) to the factory preset.

Picture Settings

Reset to Default Picture Settings

Luminance/Colour Adjustment

Noise Reduction

Sharpness Adjustment

Display

Bandwidth Limitation

Normal

Off

Auto

Picture Type

24p / 25p Conversion

Progressive

Set 1

tur

re Se

ttin

ustment

Normal

Off

Auto

Set 1

During BD-Video playback,

these icons switch to the

ones for BD Video content.

DMP-UB900_EG-SQW0698.book 27 ページ２０１６年３月７日　月曜日　午前１１時４６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-UB900 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-UB900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info