Bedienungsanleitung Panasonic DMP-UB900 (Seite 31 von 44) (Englisch)

641954

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

- 31 -

Reference

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.



≥ To enjoy BD-Video that supports Dolby Atmos

DTS:X

Connect this unit to an AV amplifier or similar device that

supports it with an HDMI cable, and select the following

settings:

– Dolby D/Dolby D +/Dolby TrueHD: “Bitstream”

– DTS/DTS-HD: “Bitstream”

– BD-Video Secondary Audio: “Off”

Dolby Atmos is a trademark of Dolby Laboratories.

∫ OPTICAL / COAXIAL Down Sampling

Select whether or not to convert the sampling

frequency of the audio to be output from the

OPTICAL/COAXIAL terminal.

If you choose to convert the sampling frequency,

you can limit the maximum output to 48 kHz or

96 kHz.

≥ Set a frequency supported by the connected

device.

≥ When playing back BD-Video, signals are

converted to 48 kHz despite the settings in the

following cases:

– when the signals have a sampling frequency

of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to

“On”

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the

connected equipment supports the virtual

surround function.

≥ The downmix effect is not available when

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the

following cases:

– AVCHD playback

– Playback of secondary audio (including the

button click sound).

∫ HDMI Output Settings of Music Playback

Minimise the audio noise during music playback

by automatically switching the video output to

1080i.

∫ Settings for High Clarity Sound

Set a terminal that will stop processing audio

signals or whether or not to turn on/off the unit’s

display when “High Clarity Sound” (> 28) is set to

“On (Video Off)” or “On (Video On)”.

≥ Set an option for video playback and audio

playback.

∫ Audio Delay

Synchronization between picture and sound is

corrected by adjusting the delay time of the audio

output.

∫ Analogue Multi Channel

Multi-channel surround sound is output from the

AUDIO OUT terminal.

≥ If “On” is selected, audio will not be output from

the HDMI OUT terminal.

– Speaker presence and size

()

– Delay time ( )

– Channel balance ( )

To finish the speaker setting

Select “Complete”.

∫ 3D BD-Video Playback

Select the playback method of 3D compatible

video software.

∫ 3D AVCHD Output

Select the output method of 3D AVCHD videos.

∫ 3D Playback Message

Set to display or hide the 3D viewing warning

screen when playing back the 3D compatible

video software.

DMP-UB900_EG-SQW0698.book 31 ページ２０１６年３月７日　月曜日　午前１１時４６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-UB900 Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-UB900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info