Bedienungsanleitung Panasonic DMP-UB900 (Seite 35 von 44) (Englisch)

641954

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

- 35 -

Reference

Troubleshooting guide

Before requesting service, please perform the

following checks.

If the problem remains unresolved, consult

your dealer for instructions.

The following do not indicate a problem with

this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

– Image disturbance when replacing 3D discs.

∫ Unit does not respond to remote

control or unit’s buttons.

Touch and hold [Í/I] on the main unit for

3 seconds.

– If still unable to turn the unit off, disconnect the

AC mains lead, wait 1 minute, then reconnect

the AC mains lead.

∫ The buttons of the unit do not work.

Touch the buttons with your finger. They may not

work if operated with your fingernails or hands

wearing gloves.

∫ The buttons of the unit are sensitive.

The buttons of the unit respond to light touch. Do

not place objects on or around them.

∫ Cannot eject disc.

1 While the unit is off

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.*

– “00 RET” is displayed on the unit’s display.

2 Press [1] (right) repeatedly on the remote

control until “06 FTO” is displayed on the

unit’s display.

3 Press [OK].

* Perform this operation when the light on the remote control

button is turned off. (> 8, [LIGHT])

To return to the factory default.

¾ Select “Yes” in “Default Settings” in the Setup

menu. (> 34)

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 While the unit is off

Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.*

– “00 RET” is displayed on the unit’s display.

2 Press [1] (right) repeatedly on the remote

control until “08 FIN” is displayed on the unit’s

display.

3 Press and hold [OK] for more than 5 seconds.

* Perform this operation when the light on the remote control

button is turned off. (> 8, [LIGHT])

This unit is turned off when the input for the

TV is switched.

¾ This is a normal phenomenon when using

VIERA Link. For details please read the

operating instructions for the TV.

The remote control doesn’t work properly.

¾ Change the batteries in the remote control.

(> 5)

¾ The remote control and this unit are using

different codes.

If “SET CODE ” is displayed on the unit’s

display when a button is pressed on the

remote control, change the code on the

remote control.

Press and hold [OK] and the displayed

number (“”) for more than 5 seconds.

This unit is turned off automatically.

¾ To save on electricity, this unit is turned off

automatically if there is no button operation

for about 20 minutes when not playing back

(such as when paused or displaying the

menu, displaying still pictures, etc.).

Do you have the latest firmware installed?

Panasonic is constantly improving the unit’s

firmware to ensure that our customers are

enjoying the latest technology. (> 18)

General operation

DMP-UB900_EG-SQW0698.book 35 ページ２０１６年３月７日　月曜日　午前１１時４６分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMP-UB900 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMP-UB900

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info