Bedienungsanleitung Panasonic DMPB100 (Seite 40 von 48) (Englisch)

602941

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

VQT2H73

The images from this unit do not appear on the

television.

Picture is distorted.

¾ Make sure that the television is connected to HDMI AV OUT

terminal on this unit. (> 25)

¾ Make sure that the television’s input setting (e.g., VIDEO 1) is

correct.

¾ When “24p Output” is set to “On”, HDMI authentication takes

place where 24p images switch to other images, and a black

screen is displayed. (> 32)

¾ When “24p Output” is set to “On”, jittering may occur while

playing DVD-Video other than 24p images. In this case, turn

“24p Output” to “Off”. (> 32)

¾ An incorrect resolution is selected in “

HDMI Video Format

”,

when the television is connected to HDMI AV OUT terminal.

Set the item again.

¾ Picture may not be seen when more than 4 devices are

connected with HDMI cables. Reduce the number of

connected devices.

¾ The unit and television are using different video systems.

Change the setting to match the equipment you are

connecting with. (> 33, “TV System” in the “TV Aspect /

HDMI Function Settings”)

¾ The system used on the disc doesn't match your television.

jPAL discs cannot be correctly viewed on an NTSC

television.

jThis unit can convert NTSC signals to PAL60 for viewing

on a PAL television. (> 31, “NTSC Contents Output”

in the “Picture”)

Video is not output in high definition.

¾ Confirm that the “HDMI Video Format” in the Setup menu is

set properly. (> 32)

Audio is not output in bitstream.

¾ Dolby Digital Plus, Dolby TrueHD, and DTS-HD audio are not

output in bitstream. To output the bitstream, select “Default

Settings” to restore the factory presets and make proper

settings.

The 4:3 aspect ratio picture expands left and right.

Screen size is wrong.

¾ Use the television to change the aspect. Refer to your

television’s operating instructions.

¾ When using an HDMI cable, change “TV Aspect” type to “4:3

Pan & Scan”. (> 32)

No sound from other speakers.

¾ Check all connections and settings. (> 25)

Cannot hear the desired audio type.

¾ Audio may not be heard when more than 4 devices are

connected with HDMI cables. Reduce the number of

connected devices.

Cannot switch audio.

¾ When connecting an amplifier/receiver using an HDMI cable,

you cannot switch the audio if “Dolby D/Dolby D +/Dolby

TrueHD” or “DTS/DTS-HD” is set to “Bitstream”. Set “Dolby

D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “PCM”.

(> 31)

Music on an SD card cannot be played.

¾ Data that can be played from an SD card are AVCHD,

MPEG2 and JPEG data. (> 7)

The contents of the card cannot be read.

¾ The card is not compatible or the contents on the card may

be damaged. (> 7)

¾ Turn off and then turn on the unit again.

Connection

Card

DMPB100EB-VQT2H73_eng.book 40 ページ２０１０年１月１５日　金曜日　午後９時１９分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPB100 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPB100

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info