Bedienungsanleitung Panasonic DMPBD73GA (Seite 25 von 39) (Englisch)

602960

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

- 25 -

Settings

∫ Picture Mode (> 24)

∫ Picture Adjustment (> 24)

∫ HDMI Output

Press [OK] to show the following settings:

¾ HDMI Video Format

The items supported by the connected devices

are indicated on the screen as “¢”. When any

item without “¢” is selected, the images may be

distorted.

≥ If “Automatic” is selected, the best suited

output resolution to the connected TV is

automatically selected.

≥ To enjoy high-definition video up-converted to

1080p, you need to connect the unit directly

to 1080p compatible HDTV (High Definition

TV). If this unit is connected to an HDTV

through other equipment, the other equipment

must also be 1080p compatible.

¾ Deep Colour Output

This setting is for selecting whether to use Deep

Colour Output when a TV that supports Deep

Colour is connected.

¾ Contents Type Flag

Depending on the playback content, the TV will

output adjusting to the optimal method when a

TV that supports this function is connected.

∫ Dynamic Range Compression

You can listen at low volumes but still hear

dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

∫ Digital Audio Output

Press [OK] to show the following settings:

¾ Dolby D/Dolby D +/Dolby TrueHD

¾ DTS/DTS-HD

[BDT270] [BDT170] [BDT166/165]

¾ DSD Output Mode

Select the audio signal to output.

≥ Select “PCM” or

[BDT270] [BDT170] [BDT166/165] “Off”,

when the connected equipment cannot

decode the respective audio format. This unit

decodes the audio format and transmits to the

connected equipment.

≥ If you do not make proper settings the audio

may be static or noisy.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.

Picture

[BDT270] [BDT170]

¾ 24p(4K)/24p Output

This setting is for selecting the output method

for content recorded in 24p*

, such as movies.

24p(4K)

Outputs signals by upconverting

them to 4K*

24p Outputs in 24p.

≥ Connect the compatible TV for each (4K or

1080/24p) output to the HDMI AV OUT

terminal of this unit.

≥ “24p(4K)” works only when playing back in

2D.

≥ When playing DVD-Video, set this setting to

“24p(4K)” or “24p”, and then “24p” in “Picture

Settings” (> 24) to “On”.

≥ When BD-Video/DVD-Video images other

than 24p are played, images are output at

60p.

[BDT166/165] [BD83] [BD73]

¾ 24p Output

When this unit is connected to a TV supporting

1080/24p output, movies and other material

recorded at 24p*

are output at 24p.

≥ When playing DVD-Video, set to “On” and

then set “24p” in “Picture Settings” (> 24) to

“On”.

≥ When BD-Video/DVD-Video images other

than 24p are played, images are output at

60p.

A progressive image recorded at a rate of 24 frames per

second (motion-picture film). Many BD-Video movie

contents are recorded in 24 frames/second in

accordance with the film materials.

A high resolution image/display technology of

approximately 4000 (width) k 2000 (height) pixels.

Sound

≥ “Automatic” is effective only when playing

Dolby TrueHD.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBD73GA Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD73GA

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info