Bedienungsanleitung Panasonic DMPBD80 (Seite 15 von 48) (Englisch)

602973

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

RQT9401

Setting the connection speed

When the connection test results in “Fail” after the IP and DNS-IP

addresses are assigned, perform the following settings.

After performing steps 1–3 ( 14)

4 Press [3, 4] to select “Connection Speed

Auto-Config” and press [2, 1] to select

“Off”.

5 Press [3, 4] to select “Connection Speed

Setting” and press [2, 1] to select a

connection speed.

≥Select a connection speed in accordance with the environment

of the network connected.

≥When the settings are changed, the network connection may be

disabled depending on the device.

Testing of “Proxy Server Settings”

Always test the connection when new “Proxy Server Settings”

have been made.

1 Press [SETUP].

2 Press [3, 4] to select “Network Settings”

and press [OK].

3 Press [3, 4] to select “Proxy Server

Settings” and press [OK].

4 Press [3, 4] to select “Connection Test” and

press [OK].

“Testing...”:The test is in progress.

“Pass”: The connection is completed.

Press [RETURN] to exit.

“Fail”: Please check the connection and settings.

RETURN

Proxy Server Settings

Initialize

Proxy Address

Proxy Port Number

Connection Test

----

Setting the proxy server

In most cases, default settings can normally be used without

making any changes.

Please use this setting when instructed to by your Internet

service provider.

After performing steps 1–3 ( left)

4 Press [3, 4] to select “Proxy Address” and

press [OK].

≥The text entry screen is displayed.

Text field: shows the text you have entered

5 Press [3, 4, 2, 1] to select a character and

press [OK].

Repeat this step to enter other characters.

≥Press [;] to delete.

6 Press [∫] when you complete the entry.

7 Press [3, 4] to select “Proxy Port Number”

and press [OK].

8 Enter numbers with the numbered buttons

and press [OK].

9 Press [2, 1] to select “Yes” and press [OK].

≥The specified ports may be blocked and not be able to be

used depending on the network environment.

In order to restore the default settings

After performing steps 1–3 ( left)

1) Press [3, 4] to select “Initialize” and press [OK].

2) Press [2, 1] to select “Yes” and press [OK].

Using the numbered buttons to enter characters

e.g., entering the letter “F”

1) Press [3] to move to the 3rd row.

2) Press [3] twice to highlight “F”.

3) Press [OK].

Proxy Address

Space

Finish

Delete

RETURN

1234567890

ABC

DEF

abc

def

ghi

jkl

+-*

#$&

<>@

mno

[]_

pqrs

()

tuv

{}

\ I

wxyz

“’:;

JKL

MNO

PQRS

TUV

WXYZ

0 -- 9

GHI

Proxy Port Number

Input HTTP Proxy server port number and

press [OK]. The character below can be

deleted with [CANCEL]. The number will be

set to "0" if all characters are deleted and

[OK] is pressed.

Number

TIPS

Getting started

DMP-BD80&60EB&EG&EF&GN-RQT9401_eng.book 15 ページ２００９年２月６日　金曜日　午後５時２２分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBD80 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD80

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info