Bedienungsanleitung Panasonic DMPBD85 (Seite 12 von 44) (Englisch)

603022

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

VQT2H79

STEP 5 : Setting

After connecting your new player for the first time and

pressing [Í], a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video

input on the television.

1 Press [Í].

Setup screen appears.

If this unit is connected to a Panasonic TV (VIERA)

supporting HDAVI Control 2 or later via an HDMI cable, then

the setting information on the TV is acquired by this TV.

2 Follow the on-screen instructions and

make the settings with [3, 4] and press

[OK].

“On-Screen Language”, “TV Aspect”, “Analog Audio

Output” and “Quick Start” are set.(> 29 – 31)

After completing “Easy Setting”, you can perform “Network

Easy Setting”.



≥You can perform this setup anytime by selecting “Easy Setting” in the

Setup menu. (> 31)

≥ You can also change these settings individually. (> 29 – 31)

≥ Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select

“7.1ch” if using the 7.1ch output.

After completing “Easy Setting”, you will be asked to perform

“Network Easy Setting”.

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to make your connection settings.

≥ When you experience problems (> 13)

∫ “Wireless” connection

If you select “Wireless” and “Wireless LAN Adaptor is not

connected.” is displayed, check that the Wireless LAN

Adaptor is fully inserted. Alternatively, disconnect and

reconnect it. If there is still no change in the display, consult

your dealer for advice.

Select “WPS (PUSH button)” or “Search for

access point” and then follow the on-screen

instructions and make the settings.

WPS (PUSH button):

If your Wireless router (Access point)

supports WPS (PUSH button), you can

easily perform the settings by pressing WPS

button on it.

WPS (Wi-Fi Protected Setup) is a standard that

facilitates settings relating to the connection

and security of wireless LAN devices.

1 Press WPS button or corresponding button of Wireless

router (Access point) until the lamp starts flashing.

≥ For details, refer to the operating instruction of Wireless

router (Access point).

2 Press [OK].

* Wi-Fi Protected Setup-compatible Wireless router (Access point) may

have the mark.

Search for access point:

Available Wireless routers (Access points) are searched and

listed. You can select the one to use from the list.

1 Press [3, 4] to select SSID of Wireless router (Access

point) you want to connect with. Then press [OPTION] to

show information of the selected router, make a note of

the authentication and encryption type.

≥ If you can not find the SSID, select “Search again”.

2 Press [RETURN] and then press [OK].

Then select an item on the following screen which

corresponds to the authentication type noted down in step

1 above.

Follow the on-screen instructions to make the settings.

≥ Input your encryption key code in “Encryption Key”

supplied with your Wireless router (Access point).

Easy Setting

Network Easy Setting

RETURN

Analog Audio Output

Set unit’s analog audio output.

Select “7.1ch” only when connected to an

audio receiver through 7.1ch analog

connections.

2ch (Downmix) + 5.1ch

7.1ch

RETURN

Network Easy Setting (Connection Test)

Wired

Wireless

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select “Wired”.

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL10) to the USB

port and select “Wireless”.

Access Point Connection Setting

Select a connection method for access to

Wireless LAN.

Please refer to the operating instructions of

the access point about connection methods.

WPS (PUSH button)

Search for access point

e.g.

Access Point Connection Setting

Reception

Select an access point to connect with.

To search for access point again, please

select "Search again" below.

SSID

XXXXXXXXXX

Search again

SSID

Wireless type

Authentication type

Encryption type

:XXXXXXXXXXXXXXX

:802.11n/g/b (2.4GHz)

:WPA-PSK

:AES

Access Point Connection Setting

WPA2-PSK (AES/TKIP)

WPA-PSK (AES/TKIP)

Open/Shared Key (WEP)

Open system

Select authentication type.

VQT2H79~Body_mst.fm 12 ページ２０１０年１月１８日　月曜日　午後１時４５分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBD85 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBD85

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info