Bedienungsanleitung Panasonic DMPBDT100EG (Seite 12 von 320) (Deutsch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Spanisch, Schwedisch)

603026

Zoom out

Zoom in

Vorherige Seite

1/320

Nächste Seite

VQT2U34

STEP 4 : Connecting

AC mains lead

≥ This unit consumes a small amount of AC power (“Quick

Start”: “Off”, approx. 0.2 W) even when turned off. In the

interest of power conservation, if you will not be using this

unit for an extended period of time, it can be disconnected.

STEP 5 : Setting

After connecting your new player for the first time and

pressing [Í], a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video

input on the television.

1 Press [Í].

Setup screen appears.

If this unit is connected to a Panasonic TV (VIERA)

supporting HDAVI Control 2 or later via an HDMI cable,

then the setting information on the TV is acquired by this

TV.

Follow the on-screen instructions and make

the settings with [

] and press [OK].

“On-Screen Language”, “TV Aspect” and “Quick Start”

are set. (> 29 – 31)

After completing “Easy Setting”, you can perform “Network

Easy Setting”.



≥ You can perform this setup anytime by selecting “Easy Setting” in the

Setup menu. (> 31)

≥ You can also change these settings individually. (> 29 – 31)

After completing “Easy Setting”, you can continue with

“Network Easy Setting”.

Select “Wired” or “Wireless” and press [OK].

∫ “Wired” connection

Follow the on-screen instructions to make your connection settings.

≥ When you experience problems (> 13)

∫ “Wireless” connection

If you select “Wireless” and “Wireless LAN Adaptor is not

connected.” is displayed, check that the Wireless LAN

Adaptor is fully inserted. Alternatively, disconnect and

reconnect it. If there is still no change in the display, consult

your dealer for advice.

Select “WPS (PUSH button)” or “Search for

access point” and then follow the on-screen

instructions and make the settings.

WPS (PUSH button):

If your Wireless router (Access point)

supports WPS (PUSH button), you can

easily perform the settings by pressing

WPS button on it.

WPS (Wi-Fi Protected Setup) is a standard

that facilitates settings relating to the

connection and security of wireless LAN

devices.

1 Press WPS button or corresponding button of Wireless

router (Access point) until the lamp starts flashing.

≥ For details, refer to the operating instruction of

Wireless router (Access point).

2 Press [OK].

Easy Setting

AC mains lead

(supplied)

To a household mains socket

(AC 220 to 240 V, 50 Hz)

Network Easy Setting

RETURN

Network Easy Setting (Connection Test)

Wired

Wireless

Select a connection mode.

Current setting : Wired

LAN cable connection:

Connect a LAN cable to the unit and select “Wired”.

Wireless LAN connection:

Connect the Wireless LAN Adaptor (DY-WL10) to the USB

port and select “Wireless”.

Access Point Connection Setting

Select a connection method for access to

Wireless LAN.

Please refer to the operating instructions of

the access point about connection methods.

WPS (PUSH button)

Search for access point

e.g.

(12)

DMP-BDT100EG-VQT2U34.book 12 ページ２０１０年６月２２日　火曜日　午前１１時０分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT100EG Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT100EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info