Bedienungsanleitung Panasonic DMPBDT110EB (Seite 3 von 44) (Englisch)

603027

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

VQT3B75

Getting started

Safety precautions

Unit

≥

To reduce the risk of fire, electric shock or product damage,

– Do not expose this unit to rain, moisture, dripping or splashing.

– Do not place objects filled with liquids, such as vases, on this unit.

– Use only the recommended accessories.

– Do not remove covers.

– Do not repair this unit by yourself. Refer servicing to qualified

service personnel.

– Do not let metal objects fall inside this unit.

– Do not place heavy items on this unit.

AC mains lead

≥

To reduce the risk of fire, electric shock or product damage,

– Ensure that the power supply voltage corresponds to the

voltage printed on this unit.

– Insert the mains plug fully into the socket outlet.

– Do not pull, bend, or place heavy items on the lead.

– Do not handle the plug with wet hands.

– Hold onto the mains plug body when disconnecting the plug.

– Do not use a damaged mains plug or socket outlet.

≥

Install this unit so that the AC mains lead can be unplugged from

the socket outlet immediately if any problem occurs.

SD card

≥

Keep the Memory Card out of reach of children to prevent swallowing.

Unit

≥

This unit utilizes a laser. Use of controls or adjustments or

performance of procedures other than those specified herein

may result in hazardous radiation exposure.

≥

Do not place sources of naked flames, such as lighted candles,

on this unit.

≥

This unit may receive radio interference caused by mobile

telephones during use. If such interference occurs, please

increase separation between this unit and the mobile telephone.

≥ This unit is intended for use in moderate climates.

Placement

≥

Place this unit on an even surface.

≥

To reduce the risk of fire, electric shock or product damage,

– Do not install or place this unit in a bookcase, built-in cabinet or in

another confined space. Ensure this unit is well ventilated.

– Do not obstruct this unit’s ventilation openings with

newspapers, tablecloths, curtains, and similar items.

– Do not expose this unit to direct sunlight, high temperatures,

high humidity, and excessive vibration.

Batteries

≥

Danger of explosion if battery is incorrectly replaced. Replace

only with the type recommended by the manufacturer.

≥

Mishandling of batteries can cause electrolyte leakage and may

cause a fire.

– Do not mix old and new batteries or different types at the same time.

– Do not heat or expose to flame.

– Do not leave the battery(ies) in a car exposed to direct sunlight

for a long period of time with doors and windows closed.

– Do not take apart or short circuit.

– Do not recharge alkaline or manganese batteries.

– Do not use batteries if the covering has been peeled off.

– Remove batteries if you do not intend to use the remote control

for a long period of time. Store in a cool, dark place.

≥

When disposing the batteries, please contact your local

authorities or dealer and ask for the correct method of disposal.

Caution for AC Mains Lead

For your safety, please read the following text carefully.

This appliance is supplied with a moulded three pin mains

plug for your safety and convenience.

A 5-ampere fuse is fitted in this plug.

Should the fuse need to be replaced please ensure that the

replacement fuse has a rating of 5-ampere and that it is

approved by ASTA or BSI to BS1362.

Check for the ASTA mark Ï or the BSI mark Ì on the body

of the fuse.

If the plug contains a removable fuse cover you must ensure

that it is refitted when the fuse is replaced.

If you lose the fuse cover the plug must not be used until a

replacement cover is obtained.

A replacement fuse cover can be purchased from your local

dealer.

If a new plug is to be fitted please observe the wiring code

as stated below.

If in any doubt please consult a qualified electrician.

IMPORTANT

The wires in this mains lead are coloured in accordance with

the following code:

Blue: Neutral, Brown: Live.

As these colours may not correspond with the coloured markings

identifying the terminals in your plug, proceed as follows:

The wire which is coloured Blue must be connected to the terminal

which is marked with the letter N or coloured Black or Blue.

The wire which is coloured Brown must be connected to the

terminal which is marked with the letter L or coloured Brown or

Red.

WARNING: DO NOT CONNECT EITHER WIRE TO THE

EARTH TERMINAL WHICH IS MARKED WITH THE

LETTER E, BY THE EARTH SYMBOL Ó OR COLOURED

GREEN OR GREEN/YELLOW.

THIS PLUG IS NOT WATERPROOF—KEEP DRY.

Before use

Remove the connector cover.

How to replace the fuse

The location of the fuse differ according to the type of AC

mains plug (figures A and B). Confirm the AC mains plug

fitted and follow the instructions below.

Illustrations may differ from actual AC mains plug.

1. Open the fuse cover with a screwdriver.

2. Replace the fuse and close or attach the fuse cover.

WARNING

CAUTION

CAUTION!

IF THE FITTED MOULDED PLUG IS UNSUITABLE FOR

THE SOCKET OUTLET IN YOUR HOME THEN THE

FUSE SHOULD BE REMOVED AND THE PLUG CUT

OFF AND DISPOSED OF SAFELY.

THERE IS A DANGER OF SEVERE ELECTRICAL

SHOCK IF THE CUT OFF PLUG IS INSERTED INTO

ANY 13-AMPERE SOCKET.

Fuse cover

Figure A Figure B

Fuse

(5 ampere)

Fuse

(5 ampere)

Getting startedConnections and settingsPlaybackSettingsReference

DMP-BDT310_110EB-VQT3B75.book 3 ページ２０１１年５月１６日　月曜日　午後５時５７分

Panasonic DMPBDT110EB Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT110EB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info