Bedienungsanleitung Panasonic DMPBDT110EG (Seite 31 von 42) (Englisch)

603029

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Settings

VQT3B63

Still Mode

Select the type of picture shown when you pause playback.

Seamless Play

The chapter segments in playlists are played seamlessly.

≥ Select “On”, when the picture freezes for a moment at the

chapters segment in playlists.

NTSC Contents Output

Select PAL60 or NTSC output when playing NTSC discs.

Dynamic Range Compression

You can listen at low volumes but still hear dialog clearly.

(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)

≥ “Auto” is effective only when playing Dolby TrueHD.

Digital Audio Output

Press [OK] to show the following settings.

PCM Down Conversion

Select how to output audio with a sampling frequency of

96 kHz for the PCM output from the DIGITAL AUDIO OUT.

≥ If “On” is selected, the signals that are converted to

48 kHz are output.

≥ If “Off” is selected, and the connected equipment does not

support 96 kHz, the sound will not be output normally.

≥ Signals are converted to 48 kHz despite the settings in the

following cases:

– when the signals have a sampling frequency of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to “On”

Downmix

Select the downmix system of multi-channel to 2-channel

sound.

≥ Select “Surround encoded”, when the connected

equipment supports the virtual surround function.

≥ There is no effect on “Bitstream” via HDMI AV OUT and

DIGITAL AUDIO OUT.

≥ The audio will be output in “Stereo” in the following cases:

– AVCHD playback

– Playback of secondary audio (including the button click

sound).

7.1ch Audio Reformatting [BDT310] [BDT210]

Surround sound with 6.1ch or less is automatically

expanded and played back at 7.1ch.

≥ If “Off” is selected, sound is played over the original

number of channels.

(Note that in the case of 6.1ch audio, playback will be at

5.1ch.)

≥ Audio reformatting is enabled in the following cases:

– When you have selected “PCM” in “Digital Audio

Output”.

– When the audio is Dolby Digital, Dolby Digital Plus,

Dolby TrueHD or LPCM.

– BD-Video playback

High Clarity Sound [BDT310] [BDT210]

When connected to TV via the HDMI terminal for outputting

image, it produces clearer sound.

≥ Set to “Enable” and then set “High Clarity Sound” on the

Playback menu to “On”. (> 29)

Audio Delay

Synchronization between picture and sound is corrected by

adjusting the delay time of the audio output.

Picture

Automatic

Automatically selects the type of picture

shown.

Field

Select if jittering occurs when “Automatic”

is selected.

Frame

Select if small text or fine patterns cannot

be seen clearly when “Automatic” is

selected.

Sound

Dolby D/Dolby D +/Dolby TrueHD

DTS/DTS-HD

MPEG Audio

Select the audio signal to output.

≥ Select “PCM”, when the connected equipment cannot

decode the respective audio format. This unit decodes

the audio format and transmits to the connected

equipment.

≥ Not making the proper settings may result in noise.

BD-Video Secondary Audio

Select whether to mix or not mix the primary audio and

secondary audio (including the button click sound). (> 19)

≥

If “Off” is selected, the unit outputs the primary audio only.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT110EG Seite 31

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT110EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info