Bedienungsanleitung Panasonic DMPBDT110EG (Seite 35 von 42) (Englisch)

603029

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

SettingsReference

VQT3B63

Reference

Troubleshooting guide

Before requesting service, please perform

the following checks.

If the problem remains unresolved, consult

your dealer for instructions.

The following do not indicate a problem with this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

– Image disturbance when replacing 3D discs.

∫ Unit doesn’t respond to remote

control or front panel buttons.

Press and hold [Í/I] on the main unit for 3 seconds.

– If still unable to turn the unit off, disconnect the AC mains

lead, wait 1 minute, then reconnect the AC mains lead.

∫ Cannot eject disc.

The unit may have a problem.

1 While the unit is off, press and hold [OK], the yellow

button and the blue button on the remote control at the

same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or

[Í/I] on the unit until “06 FTO” is displayed on the unit’s

display.

3 Press [OK] on the remote control or [< OPEN/CLOSE]

on the unit.

To return to the factory preset.

Select “Yes” in “Default Settings” in the Setup menu.

(> 34)

To return all settings to the factory preset.

Reset the unit as follows:

1 While the unit is off, press and hold [OK], the yellow

button and the blue button on the remote control at the

same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or

[Í/I] on the unit until “08 FIN” is displayed on the unit’s

display.

3 Press and hold [OK] on the remote control or [< OPEN/

CLOSE] on the unit for at least 3 seconds.

This unit is turned off when the input for the

TV is switched.

This is a normal phenomenon when using VIERA Link

(HDAVI Control 4 or later). For details please read the

operating instructions for the TV.

The remote control doesn’t work properly.

Change the batteries in the remote control. (> 4)

The remote control and main unit are using different

codes. If “SET ” is displayed on the unit’s display when

a button is pressed on the remote control, change the

code on the remote control. (> 34)

The TV tuner mode is not displayed when

the TV is switched on.

This phenomenon may occur, depending on the TV

setting, when “Quick Start” is set to “On”.

– Depending on the TV, this phenomenon may be prevented

by reconnecting the HDMI cable to a different HDMI input

terminal or by changing the HDMI auto connection setting.

You have forgotten your ratings password.

You want to cancel the ratings level.

The ratings level returns to the factory preset.

1 While the unit is on, press and hold [OK], the yellow

button and the blue button on the remote control at the

same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote control or

[Í/I] on the unit until “03 VL” is displayed on the unit’s

display.

3 Press [OK] on the remote control or [< OPEN/CLOSE]

on the unit.

This unit does not recognize the USB

connection correctly.

If USB device is connected to this unit while playing a

disc or in a video communication the connection will not

be recognized. Press [HOME] and reconnect USB

device.

[BDT310] [BDT210] : USB memory and USB HDD are not

recognized via the rear USB port of this unit.

Disconnect and reconnect the USB cable. If it still does

not recognize the connection, turn this unit off and on

again.

USB devices connected using a USB extension cable

other than the supplied with the Wireless LAN Adaptor

DY-WL10 (optional) [BDT111] [BDT110] or a USB hub may

not be recognized by this unit.

If you connect USB HDD to this unit, use USB extension

cable that is supplied with the HDD.

If two USB memory and USB HDD are connected

simultaneously, they will not be recognized by this unit.

Do you have the latest firmware installed?

Firmware updates may be released to correct operating

irregularities that are discovered with certain movies.

(> 15)

General operation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT110EG Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT110EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info