Bedienungsanleitung Panasonic DMPBDT120EG (Seite 27 von 44) (Englisch)

603042

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Settings

VQT3V50

∫ Still Mode

Select the type of picture shown when you pause

playback.

∫ Seamless Play

The chapter segments in playlists are played

seamlessly.

≥ Select “On”, when the picture freezes for a

moment at the chapters segment in playlists.

∫ Sound Effects (> 25)

∫ Dialogue Enhancer (> 25)

∫ Dynamic Range Compression

You can listen at low volumes but still hear dialog

clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

≥ “Automatic” is effective only when playing Dolby

TrueHD.

∫ Digital Audio Output

¾ Dolby D/Dolby D +/Dolby TrueHD

¾ DTS/DTS-HD

¾ MPEG Audio

Select the audio signal to output.

≥ Select “PCM”, when the connected

equipment cannot decode the respective

audio format. This unit decodes the audio

format and transmits to the connected

equipment.

≥ Not making the proper settings may result in

noise.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.

¾ HDMI Audio Output

This setting selects whether or not to output

audio from HDMI.

≥ Select “Off” when the TV is connected to this

unit via an HDMI terminal, and this unit is also

connected to other devices, such as an

amplifier/receiver via an OPTICAL terminal.

∫ PCM Down Conversion

Select how to output audio with a sampling

frequency of 96 kHz for the PCM output from the

DIGITAL AUDIO OUT.

≥ If “On” is selected, the signals that are

converted to 48 kHz are output.

≥ If “Off” is selected, and the connected

equipment does not support 96 kHz, the sound

will not be output normally.

≥ Signals are converted to 48 kHz despite the

settings in the following cases:

– when the signals have a sampling frequency

of 192 kHz

– when the disc has copy protection

– when “BD-Video Secondary Audio” is set to

“On”

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the

connected equipment supports the virtual

surround function.

≥ There is no effect on “Bitstream” via HDMI AV

OUT and DIGITAL AUDIO OUT.

≥ The audio will be output in “Stereo” in the

following cases:

– AVCHD playback

– Playback of secondary audio (including the

button click sound).

Automatic

Automatically selects the type

of picture shown.

Field

Select if jittering occurs when

“Automatic” is selected.

Frame

Select if small text or fine

patterns cannot be seen

clearly when “Automatic” is

selected.

Sound

Press [OK] to show the following settings:

DMP-BDT220EG-VQT3V50.book 27 ページ２０１２年１月１０日　火曜日　午後１時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT120EG Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT120EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info