Bedienungsanleitung Panasonic DMPBDT120EG (Seite 33 von 44) (Englisch)

603042

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Reference

VQT3V50

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory preset.

– “00 RET” is displayed on the unit’s display.

This unit does not recognize the USB

connection correctly.

¾ Disconnect and reconnect the USB cable. If it

still does not recognize the connection, turn

this unit off and on again.

¾ USB devices may not be recognized by this

unit when connected using the following :

– a USB hub

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

The images from this unit do not appear on

the television.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

– “00 RET” is displayed on the unit’s display.

Set the item again. (> 26)

¾ When “3D BD-Video Playback” in the Setup

menu is set to “Automatic”, images may not

be output depending on the connection

method. After removing the disc from this unit,

select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 28)

1 While the unit is on, press and hold [OK], the

yellow button and the blue button on the

remote control at the same time for more than

5 seconds.

2 Repeatedly press [1] (right) on the remote

control or [Í/I] on the unit until “03 VL” is

displayed on the unit’s display.

3 Press [OK] on the remote control or

[< OPEN/CLOSE] on the unit.

– a USB extension cable other than the

supplied with the Wireless LAN Adaptor

DY-WL5 (optional)

Picture

1 While the unit is on, press and hold [OK], the

yellow button and the blue button on the

remote control at the same time for more than

5 seconds.

2 Repeatedly press [1] (right) on the remote

control or [Í/I] on the unit until “04 PRG” is

displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[< OPEN/CLOSE] on the unit for at least

3 seconds.

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD audio are not output in

bitstream, select “Yes” in “Default Settings”

and make proper settings. (> 31)

¾ The unit and television are using different

video systems.

1 While the unit is on, press and hold [OK], the

yellow button and the blue button on the

remote control at the same time for more than

5 seconds.

– “00 RET” is displayed on the unit’s display.

2 Repeatedly press [1] (right) on the remote

control or [Í/I] on the unit until “05 P/N” is

displayed on the unit’s display.

3 Press and hold [OK] on the remote control or

[< OPEN/CLOSE] on the unit for at least

3 seconds.

The system switches from PAL to

NTSC

vice versa.

¾ The system used on the disc doesn’t match

your television.

– PAL discs cannot be correctly viewed on an

NTSC television.

– This unit can convert NTSC signals to

PAL60 for viewing on a PAL television

(> 26, “NTSC Contents Output”).

DMP-BDT220EG-VQT3V50.book 33 ページ２０１２年１月１０日　火曜日　午後１時１４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT120EG Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT120EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info