Bedienungsanleitung Panasonic DMPBDT131EG (Seite 37 von 48) (Englisch)

603057

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

- 37 -

Reference

Troubleshooting guide

Before requesting service, please perform the

following checks.

If the problem remains unresolved, consult

your dealer for instructions.

The following do not indicate a problem with

this unit:

– Regular disc rotating sounds.

– Image disturbance during search.

∫ Unit does not respond to remote

control or front panel buttons.

Disconnect the AC mains lead, wait 1 minute,

then reconnect the AC mains lead.

∫ Cannot eject disc.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

4 Press [OK].

To return to the factory preset.

¾ Select “Yes” in “Default Settings” in the Setup

menu. (> 36)

To return all settings to the factory preset.

¾ Reset the unit as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

4 Press and hold [OK] for more than 5 seconds.

The remote control does not work properly.

¾ Change the batteries in the remote control.

(> 5)

¾ The remote control and this unit are using

different codes.

Press and hold [OK] and the displayed

number (“”) for more than 5 seconds.

The TV tuner mode is not displayed when the

TV is switched on.

¾ This phenomenon may occur, depending on

the TV setting, when “Quick Start” is set to

“On”.

¾ Depending on the TV, this phenomenon may

be prevented by reconnecting the HDMI cable

to a different HDMI input terminal or by

changing the HDMI auto connection setting.

You have forgotten your ratings password.

You want to cancel the ratings level.

¾ The ratings level returns to the factory preset.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

4 Press [OK].

This unit does not recognize the USB

connection correctly.

¾ Disconnect and reconnect the USB cable. If it

still does not recognize the connection, turn

this unit off and on again.

¾ USB devices may not be recognized by this

unit when connected using the following :

– a USB hub

¾ If you connect USB HDD to this unit, use the

USB cable that is supplied with the HDD.

¾ When you connect a USB HDD, use the right

USB port (USB2). (> 17)

Do you have the latest firmware installed?

Panasonic is constantly improving the unit’s

firmware to ensure that our customers are

enjoying the latest technology. (> 16)

– Image disturbance when replacing 3D discs.

– “00 RET” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote

control until “06 FTO” is displayed on the

unit’s display.

General operation

– “00 RET” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote

control until “08 FIN” is displayed on the unit’s

display.

If “SET ” is displayed on the unit’s display

when a button is pressed on the remote

control, change the code on the remote

control.

– “00 RET” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote

control until “03 VL” is displayed on the unit’s

display.

– a USB extension cable other than the

supplied with the Wireless LAN Adaptor

DY-WL5 (optional)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT131EG Seite 37

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT131EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info