Bedienungsanleitung Panasonic DMPBDT131EG (Seite 38 von 48) (Englisch)

603057

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

- 38 -

Reference

The images from this unit do not appear on

the TV.

Picture is distorted.

¾ An incorrect resolution is selected in “HDMI

Video Format”. Reset the setting as follows:

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

Set the item again. (> 30)

– When Dolby Digital Plus, Dolby TrueHD,

and DTS-HD audio are not output properly,

select “Yes” in “Default Settings” and make

proper settings. (> 36)

Video is not output in high-definition.

¾ Confirm that “HDMI Video Format” in the

Setup menu is set properly. (> 30)

A black band is displayed around the edge of

the screen.

The aspect ratio of the screen is abnormal.

¾ Confirm the “TV Aspect” is set properly.

(> 35)

¾ Adjust the aspect setting on the TV.

Picture

– “00 RET” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote

control until “04 PRG” is displayed on the

unit’s display.

4 Press and hold [OK] for more than

5 seconds.

¾ The unit and TV are using different video

systems.

1 Turn the unit on.

2 Press and hold [OK], the yellow button and

the blue button on the remote control at the

same time for more than 5 seconds.

– “00 RET” is displayed on the unit’s display.

3 Press [1] (right) repeatedly on the remote

control until “05 P/N” is displayed on the unit’s

display.

4 Press and hold [OK] for more than

5 seconds.

The system switches from PAL to NTSC or

vice versa.

¾ The system used on the disc doesn’t match

your TV.

– PAL discs cannot be correctly viewed on an

NTSC TV.

¾ When “3D BD-Video Playback” in the Setup

menu is set to “Automatic”, images may not

be output depending on the connection

method. After removing the disc from this

unit, select “Set before play” in the Setup

menu, and select “2D Playback” in the setup

screen displayed when playing 3D discs.

(> 32)

¾ [BDT330] When outputting in 24p (4K), images

may be distorted depending on the HDMI

cable. Use an HDMI cable that supports 4K

output.

Video is not output. [BDT330]

¾ Video from the HDMI AV OUT SUB terminal

is not output when the “HDMI(SUB) Output

Mode” is set to “V.OFF(Video Off)”. (> 31)

3D video is not output.

¾ Connect to a full high-definition TV.

¾ Is there a non-3D compatible amplifier/

receiver connected between this unit and a

TV? (> 11)

¾ [BDT330] If there is a non-3D compatible

amplifier/receiver connected to the HDMI AV

OUT SUB terminal, set the “HDMI(SUB)

Output Mode” to “V.OFF(Video Off)”. (> 11)

¾ Are the settings on this unit and the TV

correct? (> 21)

¾ Is the amplifier/receiver that is connected

between this unit and TV on?

¾ Depending on the connected TV, the video

being played back might switch to 2D video

due to changes in resolution etc. Check the

3D setting on the TV.

3D video is not output correctly as 2D.

¾ Select “Set before play” in the Setup menu,

and select “2D Playback” in the setup screen

displayed when playing 3D discs. (> 32, “3D

BD-Video Playback”)

¾ Discs that have recorded titles with Side by

side (2 screen structure) and that can be

enjoyed in 3D are played back in accordance

with the settings of the TV.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT131EG Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Panasonic DMPBDT131EG

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info