Bedienungsanleitung Panasonic DMPBDT160GN (Seite 24 von 36) (Englisch)

603080

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

SQT0126

∫ HDMI Output

Press [OK] to show the following settings:

¾ HDMI Video Format

The items supported by the connected devices

are indicated on the screen as “¢”. When any

item without “¢” is selected, the images may be

distorted.

≥ If “Automatic” is selected, the best suited

output resolution to the connected TV is

automatically selected.

≥ To enjoy high-definition video up-converted to

1080p, you need to connect the unit directly

to 1080p compatible HDTV (High Definition

TV). If this unit is connected to an HDTV

through other equipment, the other equipment

must also be 1080p compatible.

¾ 24p Output

≥ When playing DVD-Video, set to “On” and

then set “24p” in “Picture Settings” (> 23) to

“On”.

≥ When BD-Video/DVD-Video images other

than 24p are played, images are output at

60p.

¾ Deep Colour Output

This setting is for selecting whether to use Deep

Colour Output when a TV that supports Deep

Colour is connected.

¾ Contents Type Flag

Depending on the playback content, the TV will

output adjusting to the optimal method when a

TV that supports this function is connected.

∫ Dynamic Range Compression

You can listen at low volumes but still hear

dialogue clearly.

(Dolby Digital, Dolby Digital Plus and Dolby

TrueHD only)

∫ Digital Audio Output

Press [OK] to show the following settings:

¾ Dolby D/Dolby D +/Dolby TrueHD

¾ DTS/DTS-HD

Select the audio signal to output.

≥ Select “PCM”, when the connected

equipment cannot decode the respective

audio format. This unit decodes the audio

format and transmits to the connected

equipment.

≥ If you do not make proper settings the audio

may be static or noisy.

¾ BD-Video Secondary Audio

Select whether or not to mix the primary and

secondary audio (including the button click

sound).

If “Off” is selected, the unit outputs the primary

audio only.

∫ Downmix

Select the downmix system of multi-channel to

2-channel sound.

≥ Select “Surround encoded”, when the

connected equipment supports the virtual

surround function.

≥ The downmix effect is not available when

“Digital Audio Output” is set to “Bitstream”.

≥ The audio will be output in “Stereo” in the

following cases:

– AVCHD playback

– Playback of secondary audio (including the

button click sound).

∫ DTS Neo:6

2ch (2.1ch) audio is expanded to 7ch (7.1ch).

≥ This function works when the following

conditions are met:

– Audio recorded at 96 kHz or lower is output.

– “Digital Audio Output” is set to “

PCM

” when

audio other than PCM is output.

When this unit is connected to a TV supporting

1080/24p output, movies and other material

recorded at 24p* are output at 24p.

* A progressive image recorded at a rate of 24 frames per

second (motion-picture film). Many BD-Video movie

contents are recorded in 24 frames/second in accordance

with the film materials.

Sound

≥ “Automatic” is effective only when playing

Dolby TrueHD.

DMP-BDT260&161&160&BD91&81_EBGNGCGAGW-SQT0126_eng.book 24 ページ２０１４年２月２８日　金曜日　午前１０時４４分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMPBDT160GN Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info