Bedienungsanleitung Panasonic DMR-BST835 (Seite 24 von 128) (Englisch)

560549

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Getting started

VQT4W69

Settings

When you experience problems

Refer to “When you experience problems with

Easy Network Setting”. (> 115)

To restart Easy Network Setting

1 Press [FUNCTION MENU]. (> 21)

2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Easy Network Setting” in “Network”,

then press [OK].

To redo settings individually

If “Easy Network Setting” did not work properly or

when you change the settings individually,

perform the following steps:

1 Press [FUNCTION MENU]. (> 21)

2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Network Settings” in “Network”, then

press [OK].

4 Refer to “Network Settings”. (> 96)

Check security before using Home Network

function

If you set “Home Network function” to “On”, all

connected devices on the same network can

access this unit. Ensure that the router for your

home network has adequate security system to

prevent unauthorized access.

• Refer to the operating instructions of the hub or router.

• If you set “Home Network function” or “Remote Recording

function” to “On”, the setting for “Quick Start” is fixed to

“On”.

• Do not use this unit to connect to any wireless network for

which you do not have usage rights.

During automatic searches in a wireless network

environment, wireless networks (SSID) for which you do

not have usage rights may be displayed; however, using

these networks may be regarded as illegal access.

• After performing network settings on this unit, the settings

(encryption level, etc.) of the Wireless router might change.

When you have trouble getting online on your PC, perform

the network settings on your PC in accordance with the

settings of Wireless router.

• Please be aware that connecting to a network without

encryption may result in the content of the communication

being illegitimately viewed by a third party, or the leaking of

data such as personal or secret information.

When a single cable router is used, it is

necessary to change the settings of this unit and

then run Auto Setup.

1 Press [FUNCTION MENU].

2 Select “Basic Settings” in “Setup”, then press

[OK].

3 Select “Antenna System” in “DVB Tuning”.

5 Press [3, 4] to select “Auto Setup”, then

press [OK].

1 Select “Yes”, then press [OK].

2 Select the country, then press [OK].

Auto Setup method when using a

single cable router

4 Press [2, 1] to select “Single Cable”.

Basic Settings

RETURN

DVB Tuning

HDD / Disc / USB HDD

Picture

Sound

Display

Connection

Network

Others

RETURN

DVB Tuning

Favourites Edit

Channel List

Auto Setup

Manual Tuning

Update Channel List

Preferred Language

Exchange Channel List

Antenna System

Single Cable

LNB Configuration

Signal Condition

DMR-BST835_735_730EG_eng.book 24 ページ２０１３年７月１日　月曜日　午後４時５１分

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Panasonic DMR-BST835 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info